Recent content by sixthsense

The problem is solved now. My GC was the core server. Actually i was using tndrepublish on the dsmserver so it was overwriting the Mastercat everytime. Solution: I published the info from the core server with tndrepublish and then from the dsmserver i only gave tndpublish , with which the UE...

using unicenter 3.1 with CORe on a windows server and DSM on another seprate windows server. The 2-d map installed on the CORe PC shows all the objects and the agents on the network. The problem is that i have a personal laptop where i have installed only Unicenter Explorer and MSSQL client...

Both the ends have a regular dsl connection. Main Building has a static ip addres and remote office has a dynamic ip address. All i want is that all users in my remote office should access the internet from main building router and should be able to shre the network resources with the main...

Hi All i have two netgear fvs318 routers with following configuration Main Building Wan ip - 66.23.x.x lan- 192.168.1.1 Remote office wan ip 66.x.x.x lan 10.0.1.0 VPN tunnel is working fine on and i can ping the internal ip addresses from both sides without a problem. The problem is that...

hi i have come accross the same problem. just create a shortcut for that application and then click the properties for that shortcut check the box next to run as diffrent user and then click ok now everytime the shorcut is doubled clicked it'll ask for a user. you can create a user that has...

you mean to say under the dos emulation in win2k or in plain dos. if its under win2k its as simple as typing the command c:>ipconfig /all hope it helps Kapil Aggarwal Technical Support Engineer (For NetGear Products) VCustomer Services Pvt. Ltd. MCSE,MCSA,CCNA

hi godcom i think you have been looking for this How to Install Outlook in a Microsoft Windows Terminal Server Environment http://support.microsoft.com/support/outlook/whitepapers/outlookts.doc Hope this helps Kapil Aggarwal Technical Support Engineer (For NetGear Products) VCustomer...

make the default directory as the root /web of the domain in Ftp.pm. for more info goto http://raqhowto.com Kapil Aggarwal Technical Director Infovalley Interweb Pvt. Ltd. Microsoft Certified System Engineer visit http://www.interwebspiders.com http://www.it2ecom.net If u find the information...

http://raqhowto.com Kapil Aggarwal Technical Director Infovalley Interweb Pvt. Ltd. Microsoft Certified System Engineer visit http://www.interwebspiders.com http://www.it2ecom.net If u find the information provided here useful to u then let me know by clicking on the link below s-)

If i have forgotten my Linux root password, is there anyway to get it back or overwite it. I know there is one way throught "linux single". But what if i have disabled the "linux single" option?. Kapil Aggarwal Technical Director Infovalley Interweb Pvt. Ltd. Microsoft...

What's the difference between a parallel server and a multi threaded server. Is it in terms of proccesses or is it dependent on the hardware configuration? Kapil Aggarwal Technical Director Infovalley Interweb Pvt. Ltd. Microsoft Certified System Engineer visit http://www.interwebspiders.com...

What's the difference between a parallel server and a multi threaded server. Is it in tearms of proccesses or is it dependent on the hardware configuration? Kapil Aggarwal Technical Director Infovalley Interweb Pvt. Ltd. Microsoft Certified System Engineer visit http://www.interwebspiders.com...

probably seems like a ide cable problem change the cable thats connecting ur hard drive to the motherboard and all should be fine i'am not sure but this is usually the case Kapil Aggarwal Technical Director Infovalley Interweb Pvt. Ltd. Microsoft Certified System Engineer visit...

do a net time on the win2k server its usage is as follows NET TIME [\\computername | /DOMAIN[:domainname] | /RTSDOMAIN[:domainname]] [/SET] [\\computername] /QUERYSNTP [\\computername] /SETSNTP[:ntp server list] Kapil Aggarwal Technical Director Infovalley Interweb Pvt. Ltd...

well a staus code of 11 means An attempt was made to load a program with an incorrect format. well i couldnt make out that how does it apply to GPO's but it surely means that and a status code of 3 means The system cannot find the path specified. Kapil Aggarwal Technical Director Infovalley...