Recent content by sigipa

Thanks to all of you who have replied. I have moved the cust back to 7.0. Everything is fine now. Thanks Again, -S

Hello All, Sorry for my delayed response. I had to put the fire out first. curlycord: This doesn't effect any specific feature. RikRodgers: I have used both an on-site extension and a RAD. Basically, everything is set as it needs to be, But the sets never see it. The set config appear to be...

Hello All, I'm having a very strange problem with a MICS system. I can configure sets and lines, log out, login, and verify that everything is the way I set it. The problem is that the none of the settings are actually being applied. For example: I can set a particular feature on a phone set...

Hi, Well.. it looks like it's just a basic capacity issue. If I pull all of the wics but one, all is okay. Performance degrades as I add each subnet. I created an identical config on a linux server and it does not have any of the performance issues. I sincerely appreciate the time and interest...

Hi, Yeah, I meant that my router plugs into a 10/100 switch. I believe the ports on the ISP router are 100 though. At any rate the internet connection is 4.5M which the 10mb should handle. Any idea what the performance problem could be? Is it the fact that I've got a subnetted class C sending...

Hi, Yes. e3 is the link to the ISP router. The speed should be 100mbs. Thanks, -S

Hi, I have setup the config you recommended. It works, but performance is really bad. If I give myself a /24 address all is okay. Have I missed something? Here's my config: Building configuration... Current configuration : 948 bytes ! version 12.4 service timestamps debug datetime msec...

Hi, Thanks for your help. It is much appreciated. I've managed to get the config you mentioned working. However, I'm not sure what to do about the route between the ISP and the class C. The ISP has assigned one of the class C addresses with a netmask of /24 to the ethernet interface of their...

Hello Again, Sorry, I forgot to answer the actual question. Yes. The gateway address is part of the class C. Thanks, -S

Hi, Thanks for your reply. The ISP provides a router with the class C on the ethernet interface. We do not have access to the router so I don't know what address range is provided on the T1 interface. We use the class C address space by pointing to the ISP router's ethernet address as a...

Hello All, I am a newbie. I am in need of some advice on how to subnet a class C that was provided to me by our ISP. The ISP also provides a Cisco 3740 that routes the entire class C network. I have purchased a 3640 with 4 NM-4E cards. I want to create /28 subnets for the entire class C, but...

Hi, Thanks for the speedy reply. The event log has the following errors: 1219 - Logon rejected for xx\xx unable to obtain terminal server user configuration. RPC server is unavailable. 1053 - Windows cannot determine the user or computer name, group policy processing aborted. 1511 - Windows...

Hello All, I'm having a problem with user logons to Windows 2003 Terminal Servers in a Windows 2003 domain. I have searched for days to find another person having the same issue, but no luck so far. Setup: 2 Windows 2003 Terminal Servers, 1 Windows 2003 Domain Controller. I'm a Unix guy so...

Hello All, A couple of Qs. 1. Is there a way to have a set automatically select a ringing line when the receiver is picked up? 2. Is there a way to have a set automatically select the next available line when the receiver is picked up? CICS 7.0 Thanks, -S

Hello All, I been having the NRU map file problem. I read the threads on the topic. According to what I read NRU 10.0 should work with MICS 6.1 or higher. Unfortunately, when I try to connect to exactly that system, It it says it needs AOF01ENG. Can anyone help? I'm also looking the map files...