Recent content by shroud

Hi KCFLHRC, Thanks for that, I will programm the phone in the next card slot and see what happens

Thank you John, I have programmed the new digital phone extension on the 17th port, but just wondering is there a way to have a different model phone configured as I had to programme the phone type to be the same as the 1st port phone. I have informed our customer to install the phone on port 17...

The reach line card is installed in a Nortel Option 81C pabx and connected to a 9150 Remote Office and is a 32 port NTDR70BE card. Does it mean the 17th circuit will need to be programmed on the next card slot : Currently Digital TNS; 0 to 15 programmed on RLC TN 12 0 10, does the 17th digital...

Attempted to program new digital phone on 17th TN port, however receiving error

Thank you for Amriddle for your advice, I will definitely try this and will let you know how I get on.

When H323 1616 phones try to call out using short code 9N on the Sip trunks, it appears after only dialling 3 digits the call is sent out and therefore disconnected. They have a release 9.1 server edition sending calls via an Avaya SBCE to the SIP provider.. Alternately it appears if the CLID...

The Call log history on the communicator is empty and Adhoc conferencing not working, get error message . It mentions on Avaya documentation for conferencing the Service URI is required, however I am unable to see where this is to be entered , please can some one provide insight of what is...

Thanks all for your comments, I will probably perform the housekeeping and configure manually from new, including VMPRO mailbox and IVR.

Can you take the configuration file for a IP500v2 release 7 and import directly into a IPO Server release 9.1. Is it also possible to take a backup of Voice mail Pro mailboxes and caller applications in IP500 v2 release 7 and restore to the Server Edition Voice mail Pro. Unable to find...

As I am a novice, please can you confirm if I am to add an additional E1/T1 module, would that that normally require an additional E2T card to be added..

Thanks jpruder, is there anyway to remotely check what card is installed..

We have just taken over our First Mitel 3300 customer .Can anyone help in providing the part number for the above card and provide any description/specifications..is this a dual T1/E1 card, I can see 2 ports?

We have a customer upgrading the main office CS1K system to 7.65 , do We need to upgrade the CS1000B release 5 to 7.65 ? and if so does that mean We need to change the CS1000B to an SMG

It is currently working on exchange 2003 , but customer wants to upgrade exchange (active directory) to 2008 R2.

Has anyone got a MM 1.1 working with Exchange 2008