Recent content by shalamar

Thanks so much.

Thanks. It would be real nice if you can help me with the configuration now, since that will be the next stage.

Hi, I'm trying to connect two Definities in two remote locations using E1. My 1st challenge is that I'm not exactly sure which circuit packs I need (Tie trunk or DS1). Can somebody please help.

Thanx BTBZ, I got evrything I needed and even more.

Hi all, can anybody tell me where i can download a KX-TD500 installation manual? I really need to take a read up on some things.

Hi Lashboy No i dont hav any, I'm searching anyway and I'll let u know when I find one. Please do the same if you find.

Hi all, can anybody recommend a book for the Cisco Communications express(IPTX)exam. I am so desperate, I need to write the exam before mid next month or else I'm in serious trouble. Urgent response needed please

Hi all, can anybody recommend a book for the Cisco Ip telephony express(IPTX)exam. I am so desperate, I need to write the exam before mid next month or else I'm in serious trouble. Urgent response needed please

Hi all I am preparing to write CCNP 642-811 in 2 weeks. I have studied some dumps, but I want to know if the questions hve been changed recently. Also, how often do the questios get changed?

Thanks all. I used configured Avaya Site Administration to report alarms and monitor trunks every 30 minutes. This is to capture alarms on the trunks and include warning alarms.... Thanks Shalamar.

Hi, trying to setup my s8700 & g650 for snmp traps, already checked the docs and seen the setup procedure for the server side. If trunks are down , do i get SNMP traps? i have not seen a setup procedure for the G650. (what i want is to snmp every alarm on the media server & gateway to be...

Below are the route parameters. to be more specific.BC11SP12/R2A <RODAP:ROU=6; ROUTE DATA ROU TYPE VARC VARI VARO FILTER 6 SL60 H'00000310 H'15400000 H'06004010 NO END <ROCAP:ROU=6; ROUTE CATEGORY DATA ROU SEL TRM SERV NODG DIST DISL TRAF SIG...

The version is BC11, Protocol is now National ISDN. I was using QSIG but experienced fast busy on the channels consistently. A status of the channels show idle but a trace on the router shows that the pbx is rejecting calls. I have since changed to National ISDN but since then we can't make...

There have been having problems on the E1s interconnecting a router 7206 to MD110 PBX. All calls terminating on the PBX via the router are not diverted to the Voicemail system on 'No Answer'. I have done fault finding on this problem and i believe that patches from Ericsson will fix it. I need...

Hi VMPOP, I have been to google and ebay, but because I don't know what exactly the device is, I have not had any success. There are over 200 links to somethings called black box. I wonder if you could do the search and post the link here. I'll be very grateful. Thanks.