Recent content by shafer

Hi All, I think that I found the problem… I checked with the diagnostic tool and I found that: LDK-100 System Version GS90P-C.9Bc FEB/10 DATE: 04/11/10 TIME: 10:51:16 SITE NAME : ENTER PASSWORD: brandy ****** maint> db rc db rc ## RGU Capacity ## RGU Capacity : 10 CO Incoming Ring...

Thanks Doktor ! 1.I don't know the CO board S\W. 2. It's dose not work with any CO card (not CLCOB4 and not LCOB8, I have them both in the system). 3. Just to clear that it's does not work with any old system version (3.0, 3.5, 3.7 etc...). 4. Thanks for the link I already read every word there...

P.S I want to achieve "ring ring" cadence when outside call incomeing like the "ring ring" in the GDK16 if you remember. a different cadence between CO ring and ICM ring. I hope that I clear my self. Sharon.

Thanks for your quick answer. Single Ring for CO Call Description The cadence of ICM ring is set to 1sec on/ 4sec off. The cadence of CO ring is set to 0.4s on/ 0.2s off/ 0.4s on/ 4sec off. If this value is set to YES, the ICM ring cadence and the CO ring cadence is reversed each other. Value...

I forgot to mark few things... 1. The CO are analog and work on clcob4. 2. It dose not work on old versios too. 3. It also not work on lcob8. 4. Thank you very muce for your help! Sharon.

Hi All, I'm trying to change the ring cadence for CO incoming calls at PGM 161 flex 7 and it does not work. I tried to change it to yes or no and they are the same, the cadence stay like it's on yes mode. PBX details: Model: iPLDK 100 S\w Version: C.9Bc FEB/10 Thanks in advance, Sharon.