Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by Shades997

  1. Shades997

    can't get Harddrive to work!!

    just reset the first boot in BIO'S to CDrom, but still the same thing happens when l reinstalled my win xp disk (just bootlooping)
  2. Shades997

    can't get Harddrive to work!!

    thank you bcaster
  3. Shades997

    can't get Harddrive to work!!

    thank you paparazi, by doing this, will it keep my data on the drive and not be lost?
  4. Shades997

    can't get Harddrive to work!!

    After upgrading my motherboard and case, the harddrive keeps looping. When you boot up, it then goes through the start up cycle, then stops and asks if you want to enter Microsoft Windows XP Home Edition or Microsoft Windows, when you chose Microsoft Windows XP Home Edition, it comes up...
  5. Shades997

    No 2nd Drive

    Thanks Freestone (MIS), Garebo (Vendor) for all your help, l think that l will reformat the old drive and then try to start again
  6. Shades997

    No 2nd Drive

    l never used any type of overlay software on the old drive. I have just tried changing the old drive as the only drive, primary master, and it does not even boot up. So l think l will have to use a recovery tool program, as it happened, l do have FILERECOVERY® Professional, which l bought last...
  7. Shades997

    No 2nd Drive

    try: diskpart select disk 1 detail disk Anything listed?" Yes, there was; Maxtor 6Y080L0 Disk ID: 70824070 TYPE: IDE BUS: 0 TARGET: 1 LUN ID: 0 There are no Volumes
  8. Shades997

    No 2nd Drive

    I used DiskPart, and this was the result; I open the command prompt, then entered the command diskpart. then entered "select disk 1", the response was "Disk 1 is now the selected disk.". Then entered list partition and the responsed was "There are no partitions on this disk shown".
  9. Shades997

    No 2nd Drive

    YOu can see the drive in disk management, right? Right click on it and see if it will format. lol, No problem In the top half of the Disk Manaement Window it shows, that there is only the New C: drive is there (my new Drive), but not the 2nd (old) Drive. In the bottom half of the Disk...
  10. Shades997

    No 2nd Drive

    I forgot to say that l disabled Goback (took a while), and after the reboot, l checked to see if l could see the drive, but nothing, could only see it in Disk Manager.
  11. Shades997

    No 2nd Drive

    If you disable goback i believe thats all you have to do for goback. Just reboot now and see if you can see the new drive." The new drive is not the problem, its the 2nd (old) drive that l can't see, only in Disk Management, where it says that it is unallocated with no Drive letter
  12. Shades997

    No 2nd Drive

    Thank you for you responses, but how can l remove goback from the second drive, if l can't find the drive.
  13. Shades997

    No 2nd Drive

    l mean, Goback4 is installed on my new drive
  14. Shades997

    No 2nd Drive

    Was GoBack installed on the old drive prior to installation of the new drive or did you put GoBack on the new drive only?" Goback3 was installed on the old drive and on my new drive, Goback4 is installed - but why ?
  15. Shades997

    No 2nd Drive

    thanks For reply, I have Goback installed on my new Hard Drive, but does not reconise the 2nd drive. In the top half of the Disk Manaement Window it shows, that there is only the New C: drive is there. In the bottom half of the Disk Management Window it Shows, Disk Management shows that...
See more

Part and Inventory Search

Back
Top