Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Recent content by sg4me
-
SMTP Service smtpsvc Error 419
Greetings everyone, I keep getting event id 419 on the SMTP Service. The error is as followed *********************** Source: SMTPSVC Event ID: 419 SMTP server cannot create a file in the queue directory C:\Program Files\Exchsrvr\Mailroot\vsi 1\Queue\. *********************** Microsoft has...- sg4me
- Thread
- Replies: 0
- Forum: Microsoft: Exchange
-
Modems in Presentation Server 3.0
That’s where I was looking. However the option for async connections is not there. I uninstalled Presentation Server 3 on the server and made sure that the modems were not part of a modem pool or a RAS group as described on page 82 of the Admin guide. I then went to reinstall and it still does...- sg4me
- Post #3
- Forum: O/S Other general discussion
-
Modems in Presentation Server 3.0
Greetings, I just built out a MetaFrame Presentation 3.0 Farm. I was working on my last server which is running Windows 2003, and for the life of me, can not figure out how to set up the modems that are attached to the server. I went to the Citrix Connection Configuration Tool and clicked Add...- sg4me
- Thread
- Replies: 2
- Forum: O/S Other general discussion
-
DL585
I have a DL580G1 and I have nothing bad to say about it. I picked the DL585 over the DL580 after reading some comparisons that have the DL585 with quad 2.2GHz chips faster then a DL580 with quad 3GHz when using Windows 2003 and SQL 2000 SP3. If I remember where I read the review I will post a... -
Swapping a SA 5312 for a 5302
Neill, Yes I doubled checked the unit and sure enough it has 64MB I think the earliest versions of the 5312 had 64MB, but just incase I am getting the unit swapped for a warranty part. Maybe I will get lucky and they will send me one with 128MB. :-) I was pretty sure that I could swap them but... -
Swapping a SA 5312 for a 5302
Greetings, I have a ML350 G3 with a Smart Array 5312 with 64MB of ram hosting a RAID 5 array. I have a 5302 with 128MB of ram that is sitting on a shelf doing nothing. I was wondering if I was to swap the two cards would the server recognize the new card with out a problem. Thanks, Ben -
Exchange Install Problem
I am in the process of building out a new Exchange 2003 server running on Windows Server 2003. The OS loaded fine. Domain prep and Forest prep completed with out any problems. I even installed the management tools with out any issues. However when I go to install Exchange I get a message stating...- sg4me
- Thread
- Replies: 1
- Forum: Microsoft: Exchange
-
U320 disks
About half of all my drives are the Ultra 320 (I have over 160 drives in my servers) I have not noticed a higher rate of failure in these drives compared to the Ultra 2 and 3 drives. Personally for me, the late model Ultra 3 drives (especially the 36.4GB 10k RPM drives) seemed to fail a lot. I... -
Hard Drives for ProLiant ML370(G1)
Patrickrouse, In late 2002 I replaced my six original 18.2GB drives with 72.8GB drives. I had no problems. Granted I also replaced my SMART Array 3200 with a 5302, but I don’t see you having any problems using the 72.8GB drives with the SA431. Ben -
IOS and Feature Pack Question
Hi everyone, I am going to be upgrading the IOS on our 3620 router. The router currently has the IP/FW/IDS Plus IPSEC 3DES IOS image installed. When I upgrade to the newer version (12.2.15T8) will I have to re-enter the license key for the feature pack? Happy Holidays, Ben -
Fractional T3 Frame Circuit config.
Hi Tdoma, First thing first, 2 T1’s do not equal a T3. There is a world of difference between a 3 Mbit (2xT1) connection and a 45 Mbit (1xT3) connection. However, I can help. If you are using a bonded T solution which it sounds like you are, you should get a Multiflex Trunk T1 VWIC (Part... -
ML 370 won't install 2003 Server
You need Smartstart 5.5 to install Windows Server 2003 on a ML370 G1. You need to do a manual installation and select Windows .Net as the OS. You can still order a copy of 5.5 from this link http://h18000.www1.hp.com/support/files/server/us/SmartStartinfo55.html Ben -
ML370 Random Reboots!!
A brown out is what happens when the power voltage coming dips below the normal voltage. (i.e. 115v instead of the normal 120v) While this can cause a server to crash it is highly unlikely if the server is plugged into a UPS. I have another question for you. Does the Compaq Integrated... -
Advanced System Management Controller driver in Windows 2003
I just installed Server 2003 on a Proliant 3000. So far everything seems to be okay except for the fact that I can not get the Advanced System Management controller to take the updated driver off the HP website, which means none of the system agents will work. Has anyone else experienced this...
