Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by scooter6

  1. scooter6

    Set back system console

    look in /etc/default/login.... look for a line that has something like SYSTTY=1 remove that line and reboot should do it HTH Scott
  2. scooter6

    multiple IP adresses??

    look at the man page for ifconfig alias or ifconfig -a HTH Scott
  3. scooter6

    awk/sed question

    I have some text files that look like this: "Smith","Tom","1234 Main Street" "Jones","Robert L","9876 Elm Street" "Williams","John Quincy","123 USA Street" etc,etc They are already in comma-delimmited...
  4. scooter6

    dbase IV 2.0xx69 on UNIX

    Well, it even gets a little more weird.... I am in the /usr/mydirectory/dir1 , and it works fine without a problem....don't have to put full path, can create without a problem, etc.... HOWEVER...if I am in the /usr/mydirectory/dir2 , I can't.. even with having BOTH paths in the PATH in...
  5. scooter6

    dbase IV 2.0xx69 on UNIX

    I have several UNIX (SCO) servers using dbase IV 2.0xx69 dbase has been running for years on these servers.... now I'm encountering the following problem on SOME servers but not others when I open dbase, and do "dir" it shows the .dbf files as "not readable" and I have to...
  6. scooter6

    Getting started with SCO Unix

    Well, then again, it would have helped if you would have indicated that in your original post... that you were using Unixware and not SCO OpenServer... just a thought for future posts you may do here...it's always best to give more specific info so people know what OS you're talking about...
  7. scooter6

    networking question...multiple NICs

    I am building a new server with the following: SCO OpenServer Enterprise 5.0.5 Dual 850 CPU's 1 GB RAM SCO VisionFS or Samba Dual 3Com NICs (3C905C-TXM) Here's what I'm trying to do: I want to create a VisionFS/Samba share with about 12 NT machines. Is there a way to designate ONE of the...
  8. scooter6

    unix mail program problem on virtual setup

    there should be a way (I use SCO OpenServer 5.0.4) to "interactively" look at your mail being sent , the route it takes, etc. For example, without knowing what kind of unix you use, if I issue the command ./usr/mmdf/bin/deliver -w from the command line, it will scroll to the...
  9. scooter6

    How do I change the IP address on a SCO Unixware 2.1.2 system

    may want to try this, it should help you do what you need to do: sh /etc/confnet.d/configure -i after making changes, reboot, and you should be okay... hope that helps scooter6
  10. scooter6

    ADAPTEC 29160

    I believe when you attempt install at this point, when you get the initial boot: from the installation CD, you need to have the driver pkg loaded on a floppy....(it will prompt you to enter it later, don't put it in the drive just yet) at the boot: <prompt> you will need to...
  11. scooter6

    Pentium III

    The Clock Frequency I get is also 6 on this end. I normally don't modify any of the tunable parameters with any of my servers. About the only thing I do is override the driver on my NIC's to be forced at &quot;Full Duplex/100&quot; versus &quot;Auto Detect&quot; I find that most NIC's when...
  12. scooter6

    PCMCIA Network Cards

    Try taking a look at http://www.ositech.com they are listed in SCO's Compatible Hardware under PCMCIA. I briefly looked at their site and they may have what you need. I noticed several NIC's that had UNIX support. hope that helps scooter6
  13. scooter6

    awk, sed or perl ???????????

    Greetings all....not sure how I want to do the following task, so I'd like some input: I have a 'fixed length' data file that looks like this: John Robert Doe 1234 Main St Robert Smith 9876 Elm Ave William C...
  14. scooter6

    Pentium III

    I believe this is a known bug in SCO...I have several servers with dual PIII 850's and they are also reported as PII when I invoke the 'hw' command. The OSS471F does NOT correct this problem either. I have all the patches installed, etc. pursuant at least to what SCO says. I have searched and...
  15. scooter6

    Need advice/help/tips from Pros. !!!

    Hmmm....a bit of a tough one..... Certifications are good....but, the job market now is a bit &quot;soft&quot;, so that tends to &quot;take away&quot; certification &quot;usefulness&quot;. It's a bit hard to &quot;recommend&quot; what to do SPECIFICALLY since the job market seems a bit soft...
See more

Part and Inventory Search

Back
Top