Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Recent content by scion515
-
Need Help asap if posibile till monday?
well the thing is i can get the multicast on both vlans but not at the same time. Is it possible to trunk ports even tho is a edge device ? -
2950 CRC ERRORS INPUT ERRORS
Guys i got this fixed all it was is the bandwith issue, i put that now all on one-net and bandwith issue is gone thanks for help tho! -
Connection problem C2950
probably u had to bounce the port , remember sometimes u have to bounce the port in order to get it working , i had that happen to me too. shut no shut :) also what i always check is for vlans if they are ok and if the port that is trunking up up ? -
Need Help asap if posibile till monday?
Hey guys got a problem that i can not solve and with hope of your help i could resolve it till monday if posibile. Ok to explain what i want to do: I got edge-device that is on network for streaming video and also for puts out multicast, i got that all configured , now my plan is to get two... -
2950 CRC ERRORS INPUT ERRORS
That's the way it was for couple of years, it's setup that way on both end's 4507 and 2950 tho. -
2950 CRC ERRORS INPUT ERRORS
So what you are saying is that i should remove the vl 2 from spann? -
2950 CRC ERRORS INPUT ERRORS
i do and i did, but not from the switch it self . I should try that :) Forgot about doing e.real :) Thanks ! How do i shoot the bcast? -
2950 CRC ERRORS INPUT ERRORS
Ok its not CRC's or Errors that i have problems with, as it looks like the CRC's are just something that came up when i configured that switch year ago. The problem i have with is, that i loose packet's on 4 servers. How i am determinating packet loss? I state that on beginingin i am... -
-
Overlapping VLAN. Which Cisco switch to get?
I would do the same what AlpineMan said, either 2950G or 2950-60 -
2950 CRC ERRORS INPUT ERRORS
Baddos not bad idea that was something that i checked before too and i saw couple of time the connection to the server has changed to Duplex full , dont know i still have this issue , i changed cords too , no mac-address on any edge devices ware failing , because if u dont put the mac-address to... -
2950 CRC ERRORS INPUT ERRORS
Hi, This is my first post and hope ill get some good answers. I have w 4507's and 1 2950, the problem is that servers on 2950 have a small amount of packet loss like 2000 packets sent 1 or 2 loss. I can not have that. The only problem i could saw is that i see some CRC errors and Input errors...
