Recent content by sbaker899

We have had a similar problem to the one described by adsfx, so I followed the steps given by Shaunmcb but unfortunateately haven't had any luck. The device analysis test does indeed suggest that the drive may need recalibration, but when this is attempted the recalibration process will fail...

Ok, well any help you can give is appreciated. It has not yet been an issue for us either, since all PC's that we've setup with RIS so far have used PXE bootable onboard LAN. The problem will come when we go to setup one that doesn't have onboard LAN, and use one of our Realtek RTL8139 cards...

No, the RIS/FTP server is on a different box to the DHCP/DNS/Active Directory - basically all the Windows components RIS needs to work are on a separate server. Did you never manage to get the boot disk to work with this setup? Its just it isn't really possible for us to run RIS from the same...

Sounds like it's probably best to download and run the installer fully again. You can get it here: http://www.microsoft.com/downloads/details.aspx?FamilyID=141d5f9e-07c1-462a-baef-5eab5c851cf5&displaylang=en Hope that helps.

This works fine when doing a direct PXE boot from the LAN card, but what I was saying is that when using an RBFG.exe (Windows 2000 version) created boot disk for any card (including 3Com cards that are on the support list), it will not work. The RTL8139 is on the support list of the Windows...

We have a Remote Installation Services server, that is able to work correctly with clients that are booting directly from their LAN adapter, but will not work when using the RIS boot disk. I have had to create the disk with the Windows 2003 Server version of RBFG.exe, as the adapter being used...

We have a Remote Installation Services server, that is able to work correctly with clients that are booting directly from their LAN adapter, but will not work when using the RIS boot disk. I have had to create the disk with the Windows 2003 Server version of RBFG.exe, as the adapter being used...

I have just tried entering "AT S10=?" in Hyperterminal and the value returned is "000". Since there are no Windows XP drivers available for my modem, I simply have it installed as "56k Data Fax Modem PnP". Sorry to keep asking these questions, but how do I set the...

I realise that it's normal behaviour, but I was basically just looking for a way to get around the problem of other people picking up the phone without realising the Internet is in use and ending the connection. Thanks a lot for your help, I will try this if you could just point me to where...

I was wondering if anyone has any idea how to prevent the behaviour whereby when the phone is picked up (connected to same line as 56k modem), the modem simply drops the line. This can be frustrating and I so far failed to find a solution, any help is appreciated! My OS is Windows XP.

If you still want to get to the recovery console, you should be able to by booting from your XP cd. At the first prompt, press R to repair using the console rather than ENTER to install. If you can't do it this way then perhaps selecting the auto repair option from the next prompt may help?

I don't know if this will be much help to you, but I hve had a problem in Windows XP, where an external Freecom CDRW would not be recognised unless the version of Easy CD Creator that it came with was installed. Installing the software from a different CD (supposedly same version) wouldn't work...

What is the OS? If 2K/XP is there anything to be found in the event logs after you reboot? Also are you using the latest drivers for all hardware (i.e. motherboard chipset, video card, etc.)? I have found overheating to be a cause of this with both my last 2 video cards (Geforce3 Ti200 & a...

Or you could try Mozilla... www.mozilla.org A Popup blocker is one of the many advantages over IE, some of the others being a built-in download resumer and tabbed browsing (so don't have to open multiple windows like IE).

An update:- My thoughts about the CPU turned out to be right it would seem - had the machine running games all day w/o incident on a borrowed CPU, so went ahead and got hold of a new one for myself. Thanks a lot for your help! smah - I checked voltages in the Gigabyte Utility and these seemed...