Recent content by samven

Hi, Thanks for your reply, I have discovered your answer was correct until last week, Aastra have now written a patch to incorporate the 6 digit extension, thanks once again

We have an MX-ONE 4.1 SP2 with DPNSS links to another telephone system, there is a shared dial plan between the two, can the MX-ONE 4.1 SP2 route a call to the other system by simply dialling the 6 digit extension number? i.e. If I have extn 671234 on the MX-ONE 4.1 SP2 and extn 671235 on the other

We have an MX-ONE 4.1 SP2 with DPNSS links to another telephone system, there is a shared dial plan between the two, can the MX-ONE 4.1 SP2 route a call to the other system by simply dialling the 6 digit extension number? i.e. If I have extn 671234 on the MX-ONE 4.1 SP2 and extn 671235 on the other

Thank you very much for your swift reply.

Hi all, how do I use the features of the Call Manager (e.g. callback, conference etc) from an analogue phone connected to a VG224?

Hi All, I have found the cause of the problem, all extensions were in the ICDG, but only 1 had Immediate ringing, all the others had "No Ring" set, which proves the theory of the maintainer change. I have now set the extensions required to "Immediate" and all works perfectly. I have also changed...

Thanks guys, will source a card reader ASAP, thanks all for your help. Will keep you updated

Password has been changed by the maintainer, I have asked them to supply it to me as I was not given it.

Trotski - Thanks I will (subject to the password not having been changed by maintainer) will keep all informed of progress.

Hi all, thanks for your replies, TheProvider - yes I do have access to the programming tool, have not had chance to connect yet (just downloaded fron Panasonic). Also NightService still goes where it should (voicemail) cwc3 - Night service OK, also been advised maintainer has dialled in for...

I have a KX-TDA15 to look after now, the maintenance company called to renew contract and next day, all phones stopped ringing except accounts!! As a warehouse I need all phones to ring on incoming calls, how do I achieve this?

Is CCM the first application you have loaded on this server? installing other applications before the CCM does cause issues, especially virus scan or CSA

If you put ! as a translation pattern, then put the destination you want unrecognised calls to go to in "Called Party Transform Mask", then all unrecognised calls will go there.

At the moment we’ve got OS 2000.4.3(a) and all necessary patches on it. After that, we tried to install McAfee Virus Scan Enterprise 7.00. Installation was successful. Now we’re going to update the engine and dat-file by using a sdat file and the log file said that installation was ok. But...

Thank you for you assistance, it worked OK.