Recent content by sammy1563

I have a customer with a pri 23b channels and 10 dids should I assign all b channels od just 10

Can Someone Verify That There Is A Transtalk 9040 That Connects To The Magix Through The TDL Card And If So Do You Need To Install A Cat 5 Jack At The Antenna End To Connect

Goes Amber Real Quick Somtimes You Can Call Across From The Legend And It Rings A Couple Of Times Then Goes Busy Then Rings Twice On The Correct Phone Then Goes Away I Am Sending Four Nortel Is Set To Four Getting Pri D Channel Inoperative And MSG waiting Light Fac Timeout

I Am On Site Trying To Network A Legend To A Nortel BCM 400 It Was Up And Working For 4 Days Now Circuit Will Not Allow Calls Across TO The Nortel But Can Access Dialtone From Legend And Intercom To Legend Any Guidance Would Be Appreciated PRI INFORMATION A Slot 5 Switch: 5ESS A...

You Can Download The R8 Software From Avaya And Upgrade With The Software

Some Partner 18D phones Had An After Market Display Smaller Than Normal

Can The Night service Function Be Used If you Use Time Control

IS It Possible To input A did range in the dial plan routing table for example 230-260 strip and add change 270-299

Ok Tom i Must Be Missing Something On The VoiceMail Because Thats The Only Way I Can Get It To Go To Nights Any Suggestions On What I,m Doing Wrong

Hey Guys Got a Problem.I have a Group Setup With Delay Announcements And Secondary Announcements Out Of The Merlin Messaging What Are My Options Besides Telling Them To # Out To Leave a Message At Night Or Is That It.

Does anyone Know What the max distance on a Partner Ext cable Run

UH.......What I Want to use ETR cards rather than Purchase 40 New Phones how Odd. UH.......What

Do you Have to Have Digital Card in the Magix

I whould check the admin port to see if it is still live and the 355a adapter has this site been recently updated you cant do passthrough on magix.

Go into programing and allow trunk to trunk transfer and turn on remote call forwarding for the operators ext