Recent content by sakibd2k

Fantastic It works. Thank you sir I really appreciate your help.

Ok i execute the command again and am printing whole other thing again #perl -MCPAN -e 'install Config::IniFiles' CPAN: Storable loaded ok Going to read /root/.cpan/Metadata Database was generated on Mon, 13 Jul 2009 00:26:56 GMT CPAN: LWP::UserAgent loaded ok Fetching with LWP...

Hello, Thank you for responding. ya how would i do build test? Is it the command you post at last in code section? I tried it and it is taking lot of time show final result. Currently it is like blinking in command prompt with _/ what will i do?

Hello, I have installed perl v 5.8.8 But when i execute this command perl -MCPAN -e shell cpan> install Config::IniFiles i get error after some messsges that is Failed 17/26 test scripts, 34.26% okay, 0/71 subtests failed, 100% ok , make : *** [test dynamic] error 2 /usr/bin/make test not...

#sh running-config interface VLAN1 ip address 66.167.89.15 no ip directed-broadcast no ip route-cache ! interface VLAN8 ip address 192.168.2.1 255.255.255.0 no ip directed-broadcast no ip...

I forgot to send how and which port are assigned on vlan Cisco_2900#sh vlan brief VLAN Name Status Ports ---- -------------------------------- --------- ------------------------------- 1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4...

Hello, The 2900 model is about 5 years old and it shows version 12.0 Current configuration: ! version 12.0 no service pad service timestamps debug uptime service timestamps log uptime no...

from netgear router ----> cisco 2900 switch -----> host interface 8 is assigned vlan 8 others at default vlan 1 so what happening now is host connecting other than port 8 get internet connection but host connected with port 8 which is assigned to different vlan is not. May be netgear router...

Hello, Please do not get surprised for anything. I am totally newbie regarding these. First let you know that this router is not cisco, it is router(Edgewater) from isp provider. One ip i am using fro this set up. from that it connected with cisco 2900 switch. from ios if i run sh ip it...

Hello, I am trying to setup vlan using cisco 2900 series. Before that what i checked is that i connect one interface with a router (normal public ip it has like 66.xx.xxx.xx) on interface fa0/2 (did not assign any ip though in the ios) and using interface fa0/8 connected with another normal...

Hello, Thanks for replying. I got answer for my first question somewhat. Regarding the second one actually i am trying to realize Vlan practically. As from Vlan concept it says 2 devices in same vlan can talk each other but cannot with other device in other vlan. for that we have to use router...

HI, I am asking might be a fool question but cant stop myself. Why will we use cisco router and switches where as we have linksys , Dlink, Netgear? Is it price? or might be some extra propreatery feature of cisco like HDLC for wan or does not STP provided in netgear or Linksys or dlink...

I forgot to tell my os. It is vista. By default which does not have hyperterm. so i had to install it. Thanks

Hi, Thanks for the site. Should i buy (DB9M - USB A Male)converter?(as i have rj45-female db9) it says it can support ISDN terminal adpaters(which i assume cisco 2600 one of it) through your USB port with up to 230kbps data transfer rate. But when in hyperterm we choose com port i dont see com1...

Hello all, I have 2600 series router which i can access via roll over cable connecting console port using hyperterm from xp. Now i want to connect it via my Toshiba laptop which seems do not have any serial port. It has 15 pin vga and ps2 and usb port. I do not want to buy usb to serial...