Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by rval80

  1. rval80

    Group Paging

    tac84, Could it be that i have a collective group set up instead of sequential? How does that work if you want all the phones to be paged at once?
  2. rval80

    Group Paging

    Westi, I have tried that as well. I tried taking all but one phone out of the group to see if an extension was causing the issue, and no change. This is an odd one.
  3. rval80

    Group Paging

    Did that. I set this up on a demo system I have, and it works. It shouldn't matter if it's 9508's versus 9608's, right?
  4. rval80

    Group Paging

    Hello, I'm having an issue setting up internal paging to a hunt group. I set up a hunt group (775) and tried to create a button using the dial paging option, acion data 775. When the customer presses the button, it just rings the phones instead of paging. Is there some setting that I may be...
  5. rval80

    Hunt Group Mailbox

    Got this fixed. I ended up just deleting the group and re-creating it. Seeing the correct messages now.
  6. rval80

    Hunt Group Mailbox

    I'm working on an IP Office 9.1 with voicemail pro. I have a hunt group set up, with all users of the hunt group set to get messages via visual voicemail. The issue is, when they they press the visual voicemail button, the see 1/2/0 at all times. Once they click on hunt group box, then they...
  7. rval80

    Certificate Set To Expire

    Customer called and let me know that they are getting a message on their phones of a certificate expiring. The message does not indicate which certificate is expiring, and there is no error in system status about it. I've confirmed all the certificates are up to date, and cannot see one that...
  8. rval80

    Auto Attendant Option Schedule

    I have a customer that wants to have an option in their auto attendant to forward to a cell phone. The thing is, they want that option to change weekly. Is there a way to set up a schedule within the auto attendant to automatically do this?
  9. rval80

    Avaya Centralized Voicemail Down for 1 Site

    I'm working on a system that is connected to a centralized voicemail. VOicemail is up and running and working for 4/5 sites. The fifth site, is down. The odd thing is, if i make a change in manager, the voicemail will come up for about a minute once I send the config, but then goes down again...
  10. rval80

    Upgrading from 10 to 11.0

    It's weird, because it's not even showing an upgrade to 11 is even available.
  11. rval80

    Upgrading from 10 to 11.0

    I downloaded the full version off of the avaya support site
  12. rval80

    Upgrading from 10 to 11.0

    I'm having an issue upgrading a system from 10 to 11. I've installed the new version of manager, but when I got to upgrade, it's not showing the 11.0 option. I have the upgrade license, but all it's showing me is I'm on 10 and don't need to upgrade. Any suggestions?
  13. rval80

    Replacing digital station card on BCM 50

    Thanks guys, really appreciate it
  14. rval80

    Replacing digital station card on BCM 50

    I have probably a pretty basic question, but it's been a long time since I've done hardware work on a BCM. My customer has an expansion module with a 16 station card. I need to replace with a 32 station card. My question is, can I just power down the expansion module to swap the card, or do I...
  15. rval80

    FNE Codes Stopped Working

    Customer reached out to me and said their system dial tone code is not working. I tested all FNE codes, and get a fast busy every time I dial in. Any thought as to what can cause these to all of sudden stop working?
See more

Part and Inventory Search

Back
Top