Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by rudy_avaya

  1. rudy_avaya

    Avaya 1616-L w/ BM32 Issues

    So a little update now - I have used another phone and managed to get the firmware on the device. The BM32 buttons now make the phone respond but they do not do anything. I have buttons assigned to all of them nearly but none will respond apart from the UI click sound. They dont even flash green...
  2. rudy_avaya

    Avaya 1616-L w/ BM32 Issues

    Hi All, I have an Avaya 1616-L with BM32 module for expansion, I can see the phone has pulled the firmware ha and hb files ver 3000, and also the GBM32_B_1_1_0.hex firmware file for the BM32 has uploaded successfully. However I still get the green 4 flashing and the red every 4 led flashing no...
  3. rudy_avaya

    DisplayMsg function on short code

    Hi all, I’m having trouble using the DisplayMsg shortcode feature on IPO R7. I have a shortcode setup *80 that is setup with DisplayMSG, with the phone number set to: 200”;PANIC ACTIVE” 200 is a hunt group for the whole system. When dialling *80 from any phone I get call rejected and...
  4. rudy_avaya

    SIP Trunk or FXO on Avaya IPO 500V2

    Yeah just realised that after I took the photo. I’ll give it some breathing room in the morning let’s hope it lives the night. Note to self: be careful with scissors around live telephone circuits……
  5. rudy_avaya

    SIP Trunk or FXO on Avaya IPO 500V2

    Perfect, well that’s me clued up thanks for all your help guys. Now I just need to find an IDC block for my patch! Not pretty but it works^ RR
  6. rudy_avaya

    SIP Trunk or FXO on Avaya IPO 500V2

    Ahh right okay yes this makes sense actually as the 1408 is digital as I forgot. For the 1616 will I need a power injector? Thanks.
  7. rudy_avaya

    SIP Trunk or FXO on Avaya IPO 500V2

    Hi both, Thanks for the replies. I’ve ended up with an IPO 500v2, two 1616-i’s, a BM32, and 5 1408s for around 45 quid so I’m not looking to spend more than 30 more on it. I have a PoE+ switch and I have a number of 15.4w injectors, will these work or should I look at the DPSN-20HB instead...
  8. rudy_avaya

    SIP Trunk or FXO on Avaya IPO 500V2

    Perfect thanks for your help. Hopefully these bits will be here soon. May be out of scope but: will a BM32 expansion module fit on a 1408 phone? Thanks.
  9. rudy_avaya

    SIP Trunk or FXO on Avaya IPO 500V2

    For clarification, by Digital voice and analogue ports I mean DS and PHONE ports. Thanks all. -RR
  10. rudy_avaya

    SIP Trunk or FXO on Avaya IPO 500V2

    Thanks all. Yes it would be ideal to get SIP trunk licenses however upgrading to R11 and then licensing that way will be horribly difficult and expensive, since I also don’t have the original Sold To number, and the history of the machine is unknown apart from a paper mill in the midlands with...
  11. rudy_avaya

    SIP Trunk or FXO on Avaya IPO 500V2

    Hi there, Looking to run 2 or 4 lines from an ATA into the IPO. I managed to find a good deal 25 quid on a Combo Card ATM 4U; would this P/N do the trick for my purpose?: 700476013 Are these ports the same as a line port or FXO port? Thanks again. -RR
  12. rudy_avaya

    SIP Trunk or FXO on Avaya IPO 500V2

    Hi IPOhead, Yes I figured as such since the licensing is quite tough. We have an existing SIP service that we use for the business and home numbers. A BRI to SIP converter would work but far too pricey for me at the moment. Is there any card for the IPO 500 that I can use, that will provide me...
  13. rudy_avaya

    SIP Trunk or FXO on Avaya IPO 500V2

    Hi All, thanks for your responses. I have no Trunk licenses but it didn’t cause an error so I assumed it would be okay. No worries then I think FXO will be the best way about it. Which addin card would be best for just connecting one or two single pair telephone lines to the system? And any...
  14. rudy_avaya

    SIP Trunk or FXO on Avaya IPO 500V2

    Hi All, My first thread here so bear with me. I’ve got an Avaya IPO 500 V2 CU, and I’m struggling with SIP trunking slightly. I’ve got essential edition with 12 EP licenses. Essentially I’m not sure how exactly to get the trunk configured. I have a line with the appropriate information but...
See more

Part and Inventory Search

Back
Top