Recent content by rthrashe

I was able to bootup once in Safe mode without getting the 1852 error. I saw in device manager that I had Com1 and Com3 instead of Com1 and Com2. The only change I did in CMOS was to disable Serial Port B so that would not get the error booting. It still installed as COM 3 so I disabled COM 3...

IBM 300PL Model 6562-34U. On bootup receive "1852 PCI/PNP error! Not enough I/O space available. If I disable Serial Port B I can bootup. The system installs the second com port as Com 3 instead of Com 2. There is a modem installed on Com 2 even though under Device Manager Com 2 does not...

Have you tried removing all network components and reinstalling?

This problem happens sparodically. Connect to Outlook 2000 and other applications thru ICA Client Ver. 6.30.1050 to Metaframe 1.8 running on a NT 4.0 platform. Sometimes after connecting to for example Outlook your Number Keypad does not work. Also it may be working when the session is first...

When you send a print job, does anything show in the print queue?

Have you had Win98 installed on this machine before? Perhaps check and make sure you have the latest BIOS update.

Did you check to see if the printer is in fact shared out? Sometimes if the user did it themselves, they may think it is shared, but it isn't.

You can reinstall Win98 with the drivers that are available on the Win98 CD. This should get you up and running and then you can download the updated drivers off the Internet.

In C:\Windows\SendTo folder create a shortcut to Notepad.exe. Then when you right-click on a file you can send to Notepad.

The Documents you speak of are a list of the last 15 docs(photos, word docs, etc.) accessed. You can use Tweakui(free download) and once installed, you can run it and choose the paranoia tab and select Clear Document history at logon.

Have Client for Microsoft Networks installed. Goto properties of Client and make sure there is no check mark in box for Logon to NT domain. Make sure File and Print sharing for Microsoft Networks is installed. Set Client for Microsoft Networks as you Primary Login. Hope this helps.

Ignore this post. I figured out the problem.

I have an IBM 300PL Model 6562-34U which had W95 as the OS. It has a 2.1 Gig drive that was partitioned as C: and D:. I installed W98 SE from a Basic Image (No drivers) using PowerQuest Drive Image Pro 4.0. I deleted the partitions so that I would only have the one drive of 2.1 Gig. Everything...

Found the problem. Device conflict.

I am receiving the following Post Startup Error. "1852 PCI/PNP Error! Not enough IO Space available" Machine is: IBM 300PL Model 6562-34U I looked on IBM support page for Post Startup errors, but could not find 1852 listed. Can anyone out there have any idea? Any help is much...