Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Recent content by Rquinn
-
Remote User Cannot Access Network
Thanks, Will give it a try. Keep u posted Regards, Robert- Rquinn
- Post #8
- Forum: Remote access
-
Remote User Cannot Access Network
The user dialing in is using an ISDN modem with a fixed address of 10.0.0.50 and a sunet mask of 255.255.255.0 The router being used for internet access in our office has an IP address of 10.0.0.1 and a subnet mask of 255.255.255.0 all NT workstations have this address as their default gateway...- Rquinn
- Post #6
- Forum: Remote access
-
Remote User Cannot Access Network
Sorry yes this a new installation- Rquinn
- Post #4
- Forum: Remote access
-
Remote User Cannot Access Network
Have not created a routing table, wouldnt even know where to start. Using the manufacturers wizard and online documentation remote access is a straight forward process with no routing tables involved, Have noticed though when i setup the router as a DHCP server the remote computer comes back...- Rquinn
- Post #3
- Forum: Remote access
-
Remote User Cannot Access Network
I have a remote user who is dialing into our Dlink router using a standard ISDN modem card. I have setup the remote dialin features on the router and the user can dialin and connect to the router no problem using a static IP address within our range but cannot ping any IP addresses past the...- Rquinn
- Thread
- Replies: 8
- Forum: Remote access
-
XP Pro and Windows 2000 Server
no not yet i was leaving this as my last option but will give it a try THANKS !- Rquinn
- Post #3
- Forum: Microsoft: Windows servers
-
XP Pro and Windows 2000 Server
I am having major problems with xp pro communicating with 2000 server. I have 4 xpro computers connected to a windows 2000 server running active directory. All of my desktops login and authenticate with the 2000 server and i can see everything on the network. When i try to setup folders or...- Rquinn
- Thread
- Replies: 2
- Forum: Microsoft: Windows servers
