Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by Roshan2

  1. Roshan2

    Looking for technotes on 6.0 PRI bugs

    I'm running a MICS 0x32 with version 6.0 (30BwE02 NAT). Several techs on this forum have remarked in multiple threads that this version is known (even by Nortel!) to be buggy with PRIs. I would like to show some proof of this, e.g., Nortel tech article nos., to my support tech (who could get...
  2. Roshan2

    "On Another Call" doesn't appear for all phones

    Thanks for the tip. Here's what I found (expanding on the earlier info): EXT PORT MODEL FIRMWARE STATUS 282 414 M7208 Rel 18D (9908) WORKS 213 113 M7310 Rel 17B (9803) WORKS 257 310 M7310 Rel 19D (9906) NOT work 229 121 M7310 Rel 23 (2002/07)...
  3. Roshan2

    "On Another Call" doesn't appear for all phones

    I have about 100 phones -- M7208, M7310, and M7324 models -- connected to my MICS 6.0. When calling from one set to another, if the destination set is on another call, the calling set should see "On Another Call" displayed. However, this does not work for all destination sets. From the tests...
  4. Roshan2

    W2K3 Print Spool files do not delete; W2K OK

    I am building a Windows Server 2003 Standard print server to replace an existing Windows 2000 Server print server. The new server is running SP1 and is fully patched. Here's the problem: Users can print to printers on the new server -- the print jobs come out complete and correct -- but the...
  5. Roshan2

    Network Event Log errors, but CSU Stats are clean

    I have a 0x32 running MICS 6.0. I put in two PRIs, a local and an LD, about a month ago. The local has been fine, but the LD bounces at random intervals of several hours to about 10 days. All calls on it drop and these errors are recorded in the Network Event Log: EVT325-00 (S5)...
  6. Roshan2

    StarTalk Flash Caller ID shows 7 digits; how to make 10?

    The version is 1.9.00. Would an upgrade to the current version help?
  7. Roshan2

    StarTalk Flash Caller ID shows 7 digits; how to make 10?

    So does this mean that although the Flash receives and records all 10 digits (as evidenced by their inclusion on the CLID report), it only displays 7 digits when playing back a message? As for int'l. calls, I do see the country code on an incoming call on my NorStar. I haven't checked on the...
  8. Roshan2

    StarTalk Flash Caller ID shows 7 digits; how to make 10?

    I have a StarTalk Flash connected to a MICS 6.0. When playing a message, the display only shows 7 digits of the Caller ID info; the Area Code is not displayed. How can all 10 digits, including the Area Code, be displayed? I believe that this should be possible, as my manual shows that the...
  9. Roshan2

    Caller ID only shows 10 digits

    On my MICS 6.0 connected to a PRI, Caller ID information only displays 10 digits. This is OK for domestic calls, but for international calls it is not long enough. Is this a limitation of the Norstar (and if so, how can it be fixed) or the PRI? Thanks in advance, roshan
See more

Part and Inventory Search

Back
Top