Recent content by Ronin999

Well, I dumped the indexes and recreated them in the order I needed them in. Just out of curiousity, do the newer versions of foxpro allow for changing the order of these? Thanks for the help.

Thanks for the quick responses. Seems a shame that there's not a way to simply reorder the tags... especially since there is a way in the index screen to drag them to a different order. I'd really rather not delete them all and redo them. Probably a new table with the tags in it that I want...

Hello, I have a search form that populates the drop down box by using the tag command. Over development, the indexes for this database have been deleted, changed, recreated, etc. The application is finally ready but I have a problem with the order of the index tags. When the pulldown is...

The card is probably defective. Perhaps the red pin on the monitor connection on the card is bad. Have you tried it with a differnet monitor? Maybe the monitor cable is bad. If only the red doesn't work it's probably a hardware issue as opposed to software (drivers).

Is it the same time period all the time? If so, maybe the laptop is trying to start a screensaver or tries to go to a power save mode after 3 minutes.

How often are the restarts? Did it do it immediately after you built the machine or after a lot of software was installed? Could be heat related, have you checked temperatures? If the temperature is good, I would suspect faulty RAM. maybe a RAM check program could isolate the problem.

Happens quite often on the Win9x series but have only noticed it less than a handful of times on WinXP. Haven't noticed it on Win2K either but I have less axperience with it so can't make a judgement on it.

Works Great! I have been working on this thing for a while and forgot to step back and look at the forest. :) Thanks!

Hello, I am currently doing some code to use on the Peer to Peer network here at work. I have compiled it into an executable and installed it on the machines (about 14) that will be using it. This executable will be updated every so often as new features are added, bugs corrected, etc. and I...

I've had this problem before. The simplest solution I've found is to clear the BIOS and then restart. Not sure of your motherboard but I've had this on an Asus and an MSI board. Hope this helps.

Try booting the system with any peripheral card besides the video removed. Make sure RAM and processor are seated tightly and correctly. Those are the major ways to troubleshoot this issue. Also, although it may sound silly, you said you just assembled this system. Is it possible that a...