Recent content by rogodeter

Sounds like the software is not finding a good working FR board to initilaize. I would take the unit apart and check connections. If the unit is dropped the connections can come loose. The RF board looks like a standard PCMIA network card. If this does not correct the problem the unit will...

I would reccomend using the fiber connection to connect to your LAN and the MDIX port to connect another Desktop Switch. Due to the memory limitations they wiil not work well with a wireless network. Each port will only handle 2 MAC addresses. If you exceed 2 addresses these switches tend to...

You can always use the menus on a 3-Com router if you do not know the command line instructions. I do not know of a cheat sheet for these commands but the 3-com knowledge base at 3com.com should provide some commands. The three commands to provide are as follows. 1.Checking the status of ports...

I would ensure routing is enabled and a routing protocol is selected and enabled.Use ( me -ip cont) to check if routing is enabled. ( me -ospf cont) to check for routing protocol or substitute your routing protocol for ospf)

I have had good luck with the Black Box T1 Super DSU, also I think that some 3com products have a internal CSU/DSU or one can be added. Rogodeter

Have you tried the default user profile, login:root password: blank(no password)

I think that you need 2 commands, sh -pa conf and sh -ip net