Recent content by rodjor

I have configured the ASAs to stay up but when a power outage or network interruption happens it requires me to generate the interesting traffic to bring the tunnel back up. Is there anyway to bring the tunnel up without user intervention?

i am having a strange issue with my CallManager and 2851 Router with a T-1 PRI connection to the PBX. Users can dial into the VOIP network and dial out to the PBX no problem but when they enter voice mail or MeetingPlace and enter digits they are duplicated. For example if you dial into...

CallManager gateway issue. Problem solved.

CallManager is installed and configured. Thanks anyway.

I am trying to configure the CallManager for the firt time. I just want a good configuration to start with.

I need the configuration for Unified CallManager to function properly Windows Server 2003 using IP Communicator and 7975 IP Phones. Thanks a bunch!

I need the configuration for CallManager to function properly with MeetingPlace Audio Server I can't get the Audio Server to outdial.

Can you install Unified CallManager and MeetingPlace Web on the same server?

Can the your 3550 ping things in the 192.168.10.0 network? If so what is the default gateway of your PCs?

Are you departments broken down by VLANs?

What is your reason for using the loopback addresses? For OSPF purposes?

You could use an access-list to drop packets incoming on ports for example port 554 RSTP.

What VLAN was your seed router in CiscoWorks?

Try using this: ip route 0.0.0.0 0.0.0.0 10.0.0.1 track 1 ip route 0.0.0.0 0.0.0.0 10.0.90.2 254 track 1 rtr 123 reachability sla monitor 123 type echo protocol ipIcmpEcho 10.0.0.2 interface outside num-packets 3 frequency 10 sla monitor schedule 123 life forever start-time now

Do each of these require different ports to be assigned to them? Here is one way to try. static (inside, outside) tcp 10.10.10.10 80 192.168.1.10 80 netmask 255.255.255.255 static (inside, outside) tcp 10.10.10.10 25 192.168.1.10 25 netmask 255.255.255.255