Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by robl3000

  1. robl3000

    No Signaling Server Present In Node (?)

    Thanks for the suggestion, but it doesn't seem to be the answer. I saved / re-transfered, then restarted the applications. Same error presents itself when accessing the IP Firmware page. The signaling server reports it is deployed with: SIP Line, LTPS, Gateway (SIP/H323), PD, Presence...
  2. robl3000

    need help adding a line on a 2616

    Just a minor clarification to KCFLHRC's instructions. His instructions are correct, but it will depend on the current "state" of the phone. To program an Autodial key, the phone must be in an idle state (no line key active) and the handset must not be picked up. In this state, the touching the...
  3. robl3000

    No Signaling Server Present In Node (?)

    Additional information, with the exception of the IP Firmware update, the rest of the system seems to be working as expected. It shows my Signaling Server as the node leader. I have a couple phones registered. "Personal Directory" works on the phones. Element Manager seems to be talking to...
  4. robl3000

    No Signaling Server Present In Node (?)

    On a recently re-commissioned lab system (CS1000E 7.6), I tried to add updated phone firmware via Element Manager. EM informs me that "There are no Signaling Servers present in IP Telephony Node 100 configured in Call Server 10.99.100.31" on the IP Firmware Page. This is odd, as Element...
  5. robl3000

    Feature Status Lamp

    Making it work with your current sets is not really the issue. The 1100 sets have a "switch controlled feature status lamp". The problem is that your current system doesn't support using the lamp in that fashion. As GordonKapesMZ4 mentioned, the eMetrotel UCX supports using it as a MWI. The...
  6. robl3000

    Feature Status Lamp

    The Feature Status Lamp is not used, as far as I know, on the CS1000, except when doing a firmware update. There is no way to control the light with the CS1000 / Copilot, as far as I am aware. On the Nortel CS2000 (now owned by Genband and called Genband C20), the blue feature status lamp on...
  7. robl3000

    New Digital Set

    You did get prompted. When you see "KEY" prompt, you assign what function each key should provide, including an "extension" key. You didn't enter any values, which means the system assigns nothing to the keys. At the "KEY" prompt, typically you enter something like: "00 SCR 3333 0", which...
  8. robl3000

    Need help with understanding second line on 3904 sets

    Hi, LayDeeeDi: You do not need to build a full "station". There are multiple few ways to handle this. I create a "roll-over" DN key. For us, it's the easiest method for our users. Our standard is each phone is provisioned with 2 lines by default. Below is the basic recipe I use. 1.) The...
  9. robl3000

    CS1000 CP-PM CS replacement CF for CS VxWorks FMD

    Thanks for the confirmation, scotthdiv. ================================== <INSERT SIGNATURE HERE>
  10. robl3000

    CS1000 CP-PM CS replacement CF for CS VxWorks FMD

    For a CS1000E 7.65 (SA & not Co-Res) system using a CP-PM CS (VxWorks) and UCM/SS running on COTS, what is the correct CF Card size for the FMD? I've browsed through some of Avaya's docs, but I am seeing conflicting information. One bit of the installation and commissioning guide states "The...
  11. robl3000

    MIRAN 3 - Audio &quot;static&quot;

    I've replaced the cables connecting the NTDU14 chassis to the NTDU15 expansion chassis, as I had a spare set. This hasn't resolved the issue. I'll need to take some time to reconfigure the system move the card to a different slot. All of my slots are already occupied, so I need to out...
  12. robl3000

    I2033 works on BCM3.7 DOES NOT WORK on a BCM50 rel 6

    Check the IP settings on the 2033, especially the VLAN. However, note that you posted this in the CS1000 forum, not the "Nortel: Business Communications Manager BCM". There may be some BCM specific details on supported firmware, configuration settings, etc. You may want to move the thread to...
  13. robl3000

    MIRAN 3 - Audio &quot;static&quot;

    It's in an NTDU15 - MG1000 expander cabinet. ================================== <INSERT SIGNATURE HERE>
  14. robl3000

    MIRAN 3 - Audio &quot;static&quot;

    I have just installed a MIRAN 3 in a CS1000 v5.5 lab system. Routes and trunks seem to be correct as the MIRAN is operational. However, when I access the MIRAN from a phone, the recordings or prompts from the TUI have a fair bit of static. The audio is not as clear as I would have expected...
  15. robl3000

    Moving 3905 -- SCH1509

    If you need to move an ACD seat, either move it by re-terminating the cabling/jumpers in the wiring closet or IDF. THe other option is to completely out the seat, out the set built on the TN and then rebuild it from scratch on a new TN. Moving a TN associated with ACD in programming can lead...
See more

Part and Inventory Search

Back
Top