Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by robi1306

  1. robi1306

    Definity attendant outgoing caller id

    It already has an extension assigned. No CPN number with or without the entry in the isdn public-unknown-numbering screen. edited : Solved not by entering the attd entry in the isdn public unknown numbering, but by entering a proper entry for the extension used by the attendant.
  2. robi1306

    Definity attendant outgoing caller id

    Hello, Definity G3V11. When the attendant makes an outgoing call, on list trace I can see that it does not send a calling number. I have defined attendant in the isdn public-unknown-numbering screen. What other options have to be configured ? The other extensions are sending caller ID.
  3. robi1306

    SES working, but cannot access web interface

    I was told I cannot do any updates becase the hardware is too old. S8500C servers for CM and SES.
  4. robi1306

    SES working, but cannot access web interface

    /sbin/service httpd status => httpd dead but subsys locked /sbin/service httpd start => Starting httpd: Syntax error on line 92 of /etc/httpd/conf.d/01_ssl.conf: SSLCertificateKeyFile: file '/etc/opt/ecs/certs/private/server.key' does not exist or is empty missing SSL cert. any solution for...
  5. robi1306

    SES working, but cannot access web interface

    Cannot opet the web interface again, The server at ... is taking too long to respond. It was working a few days ago. Anything out of the ordinary ?
  6. robi1306

    SES working, but cannot access web interface

    Hello all, I have an old SES server which is running, the SIP phones are registered and working, but the administration web interface cannot be loaded, I get "The server at xxx is taking too long to respond". This happens from time to time, but after a few days I can access it again. I can...
  7. robi1306

    Different coverage for don't answer and active/busy ?

    *EDITED* Ok, today I learned about coverage criteria and next path :-) first coverage path ( administered to extensions ) is for active/busy. Next coverage path is for don't answer scenario.
  8. robi1306

    Different coverage for don't answer and active/busy ?

    Can this be done?
  9. robi1306

    Allow some stations to call boss directly, others go to coverage/secretary

    Hello, right now boss has coverage which sends all calls to secretary. How to allow only certain stations to call him directly ? I could use a special COR for boss and those stations, and allow only the certain stations COR to call boss COR ? But then other stations who are not allowed to...
  10. robi1306

    My Picture 9640

    Use the search function :) http://www.tek-tips.com/viewthread.cfm?qid=1610718
  11. robi1306

    IP 400 Phone tftp firmware upload

    I think we used AT-X2 & AT-X3 on the module, could that mess it up?
  12. robi1306

    IP 400 Phone tftp firmware upload

    the IPO 403 is at the default 192.168.42.1, the PC is the only thing connected, 192.168.42.11
  13. robi1306

    IP 400 Phone tftp firmware upload

    @tlpeter we managed to get the TFTP file request, so I believe the procedure is correct, the same as the one at your link.
  14. robi1306

    IP 400 Phone tftp firmware upload

    AV, FW...everything is off. Tried two laptops, 3 TFTP servers... We will try the other expansion ports.
  15. robi1306

    IP 400 Phone tftp firmware upload

    We are having trouble getting an analog 8 port expansion back to life. The main unit is an IP403, 3.2(69), successfully updated and working. We are doing the standard .bin erase and upload procedure ( DTE AT-X, TFTP via manager... ), and are having trouble with the TFTP transfer. When using...
See more

Part and Inventory Search

Back
Top