Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Recent content by RobEng
-
PIX 515 VPNs drop
If you have sysopt noproxyarp "interface" applied then your pix interface won't reply to arp requests. I had a similar problem where static nattings were not accessible from the outside Internet, but you could browse the web outbound through the firewall without a problem. As soon as I removed...- RobEng
- Post #6
- Forum: Virtual Private Networks (VPN)
-
PIX 515 VPNs drop
Don't suppose you have Sysopt noproxyarp applied do you?- RobEng
- Post #4
- Forum: Virtual Private Networks (VPN)
-
Cisco 837 to 837 VPN
So I assume that you're simply trying to setup a site to site VPN tunnel, not a VPN dial scenario? If it's a tunnel situation, the config can be done via the CLI. Eg. Lets say that Site A is 192.168.0.0/24 and that site B is 192.168.1.0/24 So: Site A ------ crypto isakmp policy 1 encr...- RobEng
- Post #2
- Forum: Virtual Private Networks (VPN)
