Recent content by Robalos

I meant I know i should exchange the batteries asap in order not to lose write cache in case of a power down failure. But if i clean cli messages i stop receiving those errors and only receive a message like this: DANGER: BATTERY LIFETIME HAS EXPIRED, REPLACE BATTERY NOW! My question is: Is...

Hi ! I know this subject seems to be quite clear but i am a little lost. Everytime i run any command through cli interface in my MA8000 storage system i get this message: "Cache battery is near its end of life, it should be replaced SOON. Run frutil to replace." I also receive this note at the...

Brick Levels are difficult to carry out. I had the same problem in our Exchange Cluster with windows 2000 two times. The first time the problem only happened in one node so we moved the cluster and opened a HW ticket with our supllier. In the other node of the cluster brick level backup worked...

I'm not sure if it aplies here but try to check if the exchange storage group or database where the mailbox is included is marked in properties as "allow this database to be restored". Hope It helps you. Best regards,

Hi DavidM and also thanks for replying, I thought too it could be but after searching some documentation (that points to the bus itself) and testing some things, it seems nothing to do with the library nor the discs. I have disconnected the FC cable that goes to the Data Router (so the library)...

Thanks for replaying "comtec". The zone is ok (configured by port instead of by www) in the san switch. The server is already in the storage group with 2 luns associates. But i havent installed the navisphere agent in the server. I havent got it. My main problem right now it's the library. Do...

Hello, I'm trying to probe a solution of backup with Linux and bacula. We have a laboratory with: - 1 HP Proliant DL360 G2 - 1 Compaq NSR (Data Router) M2402 that converts fiber channel to scsi and - 1 SDLT Library HP MSL5026 with 2 drives. DL360 server is conected with 1 pci FC HBA Emulex...

Hello, I'm trying to probea solution of backup with Linux and bacula. We have a loboratory with: - 1 HP Proliant DL360 G2 - 1 Compaq NSR (Data Router) M2402 that converts fiber chanel to scsi and - 1 SDLT Library HP MSL5026 with 2 drives. DL360 server is conected with 1 pci FC HBA Emulex...

Hello, I'm trying to probe a solution of backup with Linux and bacula. We have a loboratory with: - 1 HP Proliant DL360 G2 - 1 Compaq NSR (Data Router) M2402 that converts fiber chanel to scsi and - 1 SDLT Library HP MSL5026 with 2 drives. DL360 server is conected with 1 pci FC HBA Emulex...

Maybe the quickest way to find the las version of a file backed up is trying to restore it through the tree option and check it out the "version history" That's what i do. Hope it helps!

Problem persists. Now we have reinstalled everything: ARCServe, ARC Clients, Exchange agent, all in properly order. We have pacthed everything with SP5 and try to launch a new backup. But the process begins at 250 MB/min. Then the store.exe at the exchange machine starts to feed all the memory...

Make a new inventary of the media. Maybe a reboot caused to bad initializased that media. Best luck!

Same thoughts about ARC. I'm also planning to move but the chances are Veritas Netbackup or HP Data Protector. After evaluating both (not even try Brightstor 11, don't feel like that after our experiences) I prefer Data Protector and it's cheaper. Veritas has a lot of Java. It's good but prefer...

- Go to the services panel. - Double click on the Agent RPC service. - Go to the "recovery" tab. - Select "restart" on all three options. This is just to resolve problems with the exchange agent if it fails. Also, try to put in debug the exchange agent by the registry of the exchange server. I...

Pain is a weak word for ARcServe... Try to restart the ARCServe and the RPC service before. Maybe... Best luck!