Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Recent content by rob2038
-
ISDN
Hi; Sorry for the delay in responding to this. The reason our developer would like a per-extension method is to support CTI (i.e., the extension is used as the device). So when the call is handled, it is registered with the extension device, etc., and application server side stuff can use this...- rob2038
- Post #8
- Forum: Avaya: CM/Aura (Definity)
-
ISDN
Hi Folks; Thanks for the feedback. So is it the case then that there is no way to achieve this with ISDN? (this is preferred in our case for a couple of reasons, but we would like to be able to have each port have an extension for CTI purposes). Cheers, Rob- rob2038
- Post #6
- Forum: Avaya: CM/Aura (Definity)
-
ISDN
One thing I might add is, what is the equivalent of setting up a station with an extention that resolves to a B channel serviced by this card? Cheers, Rob- rob2038
- Post #2
- Forum: Avaya: CM/Aura (Definity)
-
ISDN
Hi Folks; We have a Definity ISDN board running NI-2 (network side) hooked up to a Dialogic ISDN card, running user-side NI-2. The D channel seems to come up properly, all B channels in service, but the Definity identifies all channels as busy. Any ideas? card has been setup, signalling...- rob2038
- Thread
- Replies: 8
- Forum: Avaya: CM/Aura (Definity)
