Recent content by rkochis

Can a Comdial Impact (specifically) or any Comdial accept a PRI or Leased Line for voice trunks? Thanks,

7alarms, The new user creation page fails. Could you possibly send me the admin software? Thanks, bob bob_kochis@gmacm._removethis_.com

I have a NEC Elite system that keeps destroying voicemail systems. Are there any other voicemail system that I can attach to this unit? The AA fails to route calls and this is the third VMS adapter this past year. Thanks in advance.

Pardon me, but is this the same sequence of programming to do the same with a Partner II r4 system. I am also trying to transfer off-net using the System Speed dials. Thanks in advance.

I am closing an office [sadeyes] that contains a Legend R7 and Intuity Audix system. I need to route all incoming calls (Co Line and DID) to an announcement that says "This office is closed please call 800-xxx-xxxx". Any simple way to do this? Thanks in advance.

Telecomboy, Thanks for the info. I have a question though. My last cabinet has Three 016 w/ring gen. and Three 016MLX cards. The math comes out to be MUCH more than 96. System works though. Am I missing something? Thanks, Bob

Hello all, I see a limitations of 200 telephones on the Avaya website for a Magix. Is this physical handsets or is it 200 extension numbers? I am trying to find out if this limitation is counitng TTR's and the like. I have a three cabinet Legend, upgrading to a Magix, and am wondering...

Fonedude, Found out what the #403 password was and still no luck. This password appeared as 'Xxxx-----' I only entered the x portion in various combinations of Upper/lower case. Was I also supposed to enter the dashes? Thanks, Bob

Hello all, I am using the latest PC Administration software v6.0.0.9 on Windows XP. Completely new installation on laptop using an external modem setup to 19200bps. Whenever I dial into a Partner ACS I get an 'invalid password' message. I am using Assisted Transfer and have checked the...

SMAH, I cannot find any of the FAQ's you mention above. Possibly different address? Thanks in advance.

I have read some posting regarding Allowed lists, etc. but they only reference things on a system level. What I am attempting to do is allow only a single extension to dial 9xx numbers for employee verification. Is this possible on a Partner II or ACS system? Thanks in advance, Bob

Orypecos, Thanks for the info! Can't look in the telephone book as I am in the Corp. HQ in Pennsylvania (which I forgot to mention).

I have a new site with Merlin Messaging installed. The AA menu prompt says "...Press *2 for dial by name...". Is this something the installer setup or is this the default selection for the system? I am a little concerned about *anything and the prompt does not specify first ten letters of...

I have a newly installed Merlin Msg. system in the field. The site now wants the unit to run bilingual, not just in English. My questions are: 1. Do I need to buy anything else? 2. Has any attached a bilingual Msg. system to a Magix R3? 3. If I go into system settings and changed to...

nunzeo, That should work as itphoneguy specified. If it does not the modem on the processor card neds to be reset (reboot phone switch) or replaced.