Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Recent content by rjanakan
-
Slow access to the server when it goes out and comeback through ASA
Hi, I just have 5 servers sitting behind ASA in my data center and pointing to ISP's DNS. So no DMZ and internal DNS. Janakan Rajendran- rjanakan
- Post #7
- Forum: Security, hacker detection & forensics
-
Slow access to the server when it goes out and comeback through ASA
Hi, Thanks for your input. Yes, I had it working using the hosts file to bypass the DNS. But I'd like to know the reason, if it's a common behavior with ASA or I'm missing some configuration. Thanks, Janakan Rajendran- rjanakan
- Post #4
- Forum: Security, hacker detection & forensics
-
Slow access to the server when it goes out and comeback through ASA
Hi, I have an ASA 5510 installed in my environment. I have a application box which is behind the ASA needs to access the webserver which is also behind the ASA. The application box is configured to point to the URL rather than the local IP. For application configuration reasons we want to keep...- rjanakan
- Thread
- Replies: 10
- Forum: Security, hacker detection & forensics
-
Viewing ASA5510 data in IEV
Hi, I got this working. IPS sensor version 5.0 doesn't send events to IEV. I upgraded to 5.1(3) then it worked. -Janakan Rajendran- rjanakan
- Post #2
- Forum: Security, hacker detection & forensics
-
Viewing ASA5510 data in IEV
Posted by: rjanakan - Corporate Psychology Resources Inc., - Oct 2, 2006, 9:35am PST Hi, I have an ASA 5510 with AIP-SSM-10 in my test environment. I have installed IEV 5.2 in one of the servers to analyze the log. The IEV server is added to IPS acl and has a username and password with...- rjanakan
- Thread
- Replies: 1
- Forum: Security, hacker detection & forensics
-
ASA 5510 Configuration- Help plz
Thanks a lot dozier and Brent. It was just the default gateway on the test webserver :-) (shy). I appreciate your help guys. Thx again. Janakan Rajendran- rjanakan
- Post #4
- Forum: Security, hacker detection & forensics
-
Cisco ASA- NAT and ACL
Dozier, Thanks for your reply. I can see inbound TCP connection established with webserver after xlation. But no outbound connection is getting established. Both Public IP and Private IP are directly conected interfaces. Do I still need routing? Please find my configuration below: ASA Version...- rjanakan
- Post #3
- Forum: Security, hacker detection & forensics
-
ASA 5510 Configuration- Help plz
Hi, I'm trying to setup ASA 5510 in my test lab to allow all incoming traffic to inside webserver. I created only one static NAT entry to translate outside public address to inside private address. I created a reverse static xlation too. I allowed all tcp,ip,icmp, udp traffic both outside and...- rjanakan
- Thread
- Replies: 7
- Forum: Security, hacker detection & forensics
-
Cisco ASA- NAT and ACL
Hi, I'm testing a Cisco ASA 5510. I'm new to PIX and using ASDM to configure it. I configured a static NAT to map a public IP to private IP. I configured ACLs. When I hit the URL from public IP, I can see the NAT happening at ASDM sys log window. But I can't see the page and after 30 seconds...- rjanakan
- Thread
- Replies: 3
- Forum: Security, hacker detection & forensics
