Recent content by rizzah1977

VOIPaintEASY do you mean why re-enter the config the config file itself, or the Boss image ? cause thats what i have to do. I have to press ctrl-x during startup of the switch, then clear the logs and then upload and apply a new boss image on the switch before it can boot again.

My main problem is that when there are power outage tests that the 460 switches get corrupt. Flash memory becomes unreadable .. sometimes the switches die. On other times when they power gets back .. and a stack gets online all at once, they dont get up oke, they dont know which is the base...

Maybe not really helpfull on short term, but you can limit the network damage to make vlan's.. While i say this, im thinking .. well your not new to this .. so you probably thought of this yourself too ;) grtz Peter

VOIPaintEASY : My stacks are all 460's and i have also read that Nortel is not a big fan of mixing 460 and 470's. So i dont think im gonna try, since we allready have enough issue's with 460 stacks alone. HungryHouse : I think you are correct, in a way that you can get a stack going with 460's...

thats correct, and now i would like to get the correct oid for those counters so i can monitor them (in my case) with PRTG.

Are you seeing this when you connect to the switch using the Device Manager ? Then it is probably the version of your OSM software. I have had this too yesterday, we bought a new 5510 48P switch and i saw a UNIT DOWN and under it my switch .. as if it has been in a stack before where the other...

Hi, We have many nortel stacks in our LAN/WAN (100/150 pcs). We got single units / stacks of 2 till 7). With many of our remote locations they keep regular power outtage tests. Alot of the times after such a test the flash got corrupt, or the stack didnt come back up again, or simply went doa...

Hi, I have used GetIf and walked over my cisco 8xx router with all the mibs. I think i found what i am looking for .. alltho im not sure. I wanted to catch the collisions on the Eth0 interface and the interface resets on the Eth0 interface. I found the following with GetIf: ------...

Heya, We run some citrix servers here at work and installed Office 2002 on them. When i open a new database in access and save it to my H: (home) drive/share and try to re-open it i get the following error: (i have to translate this from dutch so i could mistype some sentenses to the actual...

Heya, Personaly if i read your story i dont think its a problem to run an active directory .. you got to have a DC. I also dont think the win2003 box has to run the DNS. If you run DNS now under linux then configure the win2003 server to use that DNS server. (simply dont install the dns server...

Hello, I have got a wierd problem, and some of my collegue's also experianced them, and untill now we have not found a solution for this. Maybe anyone here can help us out. On our printer server which is running on Windows 2003 we added a Nashuatec copier (a machine that can do it all). When...