Recent content by Riteon

Great, thanks for the advice. I thought that the hardware solution would be favourite. Regards

I currently have two locations I work from and quite often have to access "the other" location. Currently my PC in location A is networked behind a PIX 501 and the PC in location B has software Cisco VPN connection in to location A. Sometimes (if we get a powercut) the VPN connection is...

Solved it. The Network address should be my home network and not the office network. R see below for revised script [main] AutoInitiationEnable=1 AutoInitiationRetryInterval=3 AutoInitiationList=SJ EnableLog=1 RunAtLogon=1 DialerDisconnect=1 [SJ] Network=192.168.254.3 Mask=255.255.255.0...

Hi everyone, wonder if you can help. I have my vpn setup working in te following fashion. I log onto my XP pc by entering user and password. I then double click on the VPN Dialler and press connect and this takes me into my office network. What I would like to do is have the VPN connection...

Cisco Systems VPN Client 3.6.3 Regards Riteon

EXTRA INFO: The 192.168.1.10 box is windows 2000 professional PC as is the PC at home that I wish to connect to it with.

This is my first trial at VPN so you must excuse my naiveity. I want to be able to access my office network (DSL static IP range 5 addresses) from home using my laptop pc and a VPN 3.6.3 Client (through ISDN/Modem dialup access). My office ADSL box has a range of 5 static IP addresses and I am...

I have a PIX501 and wish to set-up access rights for certain users on the local network. I am using a basic access-list acl_in deny tcp host 192.168.1.11 any access-list acl_in deny udp host 192.168.1.11 any access-list acl_in permit tcp host 192.168.1.9 any access-list acl_in permit udp host...

Don't return it. I nearly gave up too, but is has been working for months now. I am very impressed with it. If you need help just let me know. regards. R

Hi everyone, How can I create an access-list where *certain* users have access to the web at certain times(e.g. 12.00-13.00). I don't have a TACAS+ server but do have a server on the network (if that may need to be used) TIA Riteon

PIX Version 6.1(1) nameif ethernet0 outside security0 nameif ethernet1 inside security100 enable password xxxxxxx encrypted passwd xxxxx encrypted hostname pixfirewall domain-name ciscopix.com fixup protocol ftp 21 fixup protocol http 80 fixup protocol h323 1720 fixup protocol rsh 514 fixup...

pixfirewall(config)# show access-group pixfirewall(config)# show access-list pixfirewall(config)# no access-list acl_in ERROR: access-list <acl_in> does not exist pixfirewall(config)# access-list acl_in deny tcp host 192.168.1.11 any eq 80...

Hi Chris, I have entered this but it won't allow my pc access to https addresses or newsservers. What am I doing wrong? My PC is address is 192.168.1.15 I'm baffled!!!! no access-list acl_in access-list acl_in deny tcp host 192.168.1.11 any eq 80 access-list acl_in deny tcp host 192.168.1.11...

We have a very simple network with all PC's running POP3 direct to the web (no internal mailserver) through a PIX501 3DES and ADSL point. I want to allow anyone access to the web but to restrict only one pc 192.x.x.45 to allow them to connect to their POP3 account and send mail from outlook...

Dennis - have you put your DNS entries in? dhcp dns xx.xx.xx.xx xx.xx.xx.xx Regards Riteon