Recent content by rishard

what version you running ?

have u increased your paging ?what the paging like ,do a lsps -a to get paging output

well the easiest way would be change in sms to boot from networks all u need to add is the ip and network device then nim master should pick it up.once that is done it will boot from the nim image for the machine.then u can change the os the way u like. hope that answers what u looking for...

check your bootlist first before booting into maintenance mode bootlist -Om that should tell you your boot sequence if the cdrom is not there add it in and then try rebooting and selecting F5 for graphics or 5 for ascii do this just before the last icon appears for the devices.to change boot...

well you have nothing to lose seeing that your compression is 40/80gb,you can install it provide you have the drivers,it should work and the device is better

no it wouldnt,the other option if you cannot get into the system is you have to boot into maintenance mode and then mount the filesystem and then increase it,once you have done this reboot it and it should be fine goodluck !!!

did you install samba on your unix system ?there is a much easier way in mounting samba files to be shared by using SWAT which comes with samba.this is a web interface for samba that runs from your web browser.you will have to put entries into /etc/services and /etc/inetd.conf file.read on the...

Hi You need to change the bootlist to point to tape device To check what your current bootlist type 'bootlist -om normal' .To change the bootlist type bootlist -m normal rmt# insert the mksysb tape in device and reboot system.when the system boots up select key 5 for ascii term or F5 for...

what kind of login are you trying to establish,telnet or login through gui or green screen ? check filesystems not full? be more specific it helps to answer questions..!!! regards rishard

Hi go to smitty users.select change/show characterists of a user option. there you will find all the info of a particular.scroll down to see the different options.this is where one can change the password expiry time. good luck

Hi Indu If you not in the current directory where the script is then you will not be able to execute it unless you specify the path or add the the path to /etc/environment.check that the permissions are correct and that its executable. chmod 777 filename . good luck !!

hi looks like you have a corrupted odm, i could be wrong .the error you getting is saying that the CuAt (customised attributes) library cannot find the ethernet card description to allow you to perfom changes. i suggest reinstalling your operating system.try to get hold of AIX 433 cd's boot...

yegolev thanks worked like a charm.managed to add 8gb hdd to rootvg. regards

check your /etc/inittab entry for rc.tcpip. this should restart you tcpip daemon if it dies. this is what the entry should look like : rctcpip:2:wait:/etc/rc.tcpip > /dev/console 2>&1 # Start TCP/IP daemons hope it sheds more light ciao

Hi try disabling cde then reboot.see what the effect is,or disable networks reboot see what effect is.this will help you narrow down your problem.cde is network bound.check you filesystems is not full,this will also create problems. goodluck !!