Recent content by riggsme

Definitely a solid low tech option.

Thanks ToAvaya, It seems odd that we experience it on very few phones.

One of our administrative assistants would like to see when her exec's EC500 is activated. Is there a way to program a busy indicator or something like it, to the admin's phone?

We have installed approximately 600 9640's across our network, running CM 5.2 on S8720. Most of the phones are in the US, some internationally. Firmware is 3.11. From time to time a phone at HQ will partially lock up. It will not ring or give dialtone, but will allow you to navigate through...

Maybe no one is sending SNMP traps, but here's what we came up with that is now working: Log in to your G430 then type the following: ip snmp snmp-server community read-only <g430trap> read-write <g430trap> snmp-server host xxx.xxx.xxx.xxx traps v1 g430trap Where <g430trap> is the community...

Does anyone have step by step instructions on how to set the G430 to send traps? We're running an S8720 with CM 5.2.1. The G430 docs have commands, but no clear steps to get the job done. Thanks, Mike

Dufus, Thanks for the help. Will look at ARS dig conversion.

But our enterprise LDAP Dbase has both the 10 and 5 digit fields in it. There has to be a file with a pointer in One-X that tells it which LDAP field to look at for dialing.

We just connected our One-X Communicator to our Ldap directory. It looks up names well, but for internal calls, the Communicator routes calls with 10 digits across PSTN vs 5 within CM . I'm looking for the location of file with attribute mappings within One-X so I can use the "ext" field vs...

I'm building an S8300/G700 stand alone switch and have installed CM 4.0.1, configured the server, can access CM from ASA on the services port, and have updated the firmware. Here's the rub, when I plug one end of my crossover cable in to the Ext 1 ethernet port on the G700 and the other end to...

SJF, I passed along a star for your help. I re-ran the wizard and up came the G700. Thanks again! Mike

cduff, S8300 Media gateway looks like this: MEDIA GATEWAY Number: 1 IP Address: Type: g700 FW Version/HW Vintage: unavailable Name: PensacolaG700 MAC Address: Serial No...

I'm banging my head against a wall attempting to figure out why my G700 won't register with an internal S8300 running CM 3.1.2. Any help would be appreciated. Here's my G700 config Last octet of IP addresses: .90 - P330 .91 - S8300 .92 - MGP .93 - Voip .94 - IA770...

We have multiple stand alone S8300's in G700's out in field offices which are connected to our WAN via Frame Relay. Currently, we only use the frame relay for admin. We'd like to start making calls between the S8300's and our S8700 at HQ. We're using CM 3.1.2 No overlap in dialplan. Request...

That easy, huh Jim? Thanks for the help. Mike