Recent content by rhearn

Hi, I have a Cisco 871 that allows for VPN via the Cisco VPN client. When one person is connected and another person VPN's in, it kicks the first VPN user off. Any thoughts on what to look for?

Thanks, HH. This is what I am looking for !! I have 2 Vlans, one for voice and one for data. I will just be tagging voice. The data can use the native vlan.

Hi, Biv. Thanks for the reply. Need further clarification though. You say to assign PVID to the port, but autopvid is set on. The problem is, I need both Vlan 10 & Vlan 100 assigned to ports 1 - 40. How do I do that? Right now when I scroll through the ports on Vlan port configuration, I see...

Greetings... I have a baystack 470T 48 port switch that I created 2 Vlans on. Vlan 10 for voice Vlan 100 for data Ports 1-40 are to be trunked ports with access to both vlans 10 & 100. Ports 41-48 are access ports with access to Vlan 100 only. I can ping from Port 44 (for example) to Port...

Good Morning. I am "very" new to the data transmission world. Our office has no IT staff whatsoever, but the board of Directors want a small presentation on the benefits of using a partial T1 (512) as opposed to the current DSL we use today to communicate with another of our sites. Can anyone...

Hi, all. Quick question. I am looking at setting up a wireless connection between 2 buildings that are about 1500m apart. There is direct line of sight. My only issue is I am told by the powers that be that I am to use Cisco eqp only. This is my first trip down wireless lane, and I was hoping...

I have a customer who has 2 seperate networks, and he would like to buy a one printer to handle both networks, without causing any security issues. Can this be done? Thanks....

I have a video card that allows me to go out to TV. Here is the question. When I go directly to the TV all works well, but if I go through the VCR first using RCA cable I get no picture. Can I record from the computer through a VCR or is it not possible??

Here's one for you folks. I have a desktop running WIN 98 and a laptop running XP. They are on a small network sharing files. If the Win 98 machine is connected to the XP machine via a session and I shutdown the laptop (XP machine) it bluescreens on bootup????? This is the only time the machine...

I am trying to unload a tape via command line from an Ibm 7337 DLT. Does anyone know if it can be done? I am running Aix 4.3.2. I have tried mt -f /dev/rmt1 offline as well as tctl. No luck yet....... Thanks In Advance. Rich.

I need to backup some files by create/modify date. Does anyone know of any easy way to do this. I would probably be using either TAR or BACKUP. Thanks In Advance. Rich

I am having a problem pulling required info from a file. There are thousands of records on this file. I have only included 2. Here is an example of the file: 00000 (Beginning of one of many records) 00001 (some data) 00002 (some data) 00003 (account name) 00004 (some data) 00005...

Absolutely - hope it helps someone else... I did a tctl -f /dev/rmt1 status and the results said that the dlt block_size=32790 I changed the block_size of the dlt using: chdev -l rmt1 -a block_size=4096 This updated the config of the device. Now each time I do a command line backup I...

I solved my own problem - no need to reply. thanks, anyway. Rich

Unless your file systems are Large File Enabled you have a 2 GB max on file size. This is the first place I would look. Use lsfs -q [filesystem] Check the flag called bf. If it is false you can not exceed 2 Gb on that filesystem..... Hope this helps. Rich