Recent content by rgaskill1

Hi, I don't think the DB version matters. I should test the mapping of hostname to ip address as per the note - if it is ok then you obviously have a different issue. Might be worth including more of the error message in this post. Regards Richard

Also, have a look at note 858969.

Hi, Just did a very quick search on SAP net and found note 1052298. TRACE 2007-12-17 12:13:42.473 [iaxxejsbas.hpp:460] EJS_Base::dispatchFunctionCall() JS Callback has thrown unknown exception. Rethrowing. Might be worth a look. Good luck Richard

Thanks for all the replies on this one. I've replaced the failed memory and now working ok.

Hi, I hava a Sun E280R with 4GB RAM - one of the 1GB memory modules has failed and now the box won't boot. This is only a test box so could happily run with 3GB - is there a setting I need to change to enable the box to come up with the missing 1GB of RAM? Cheers Richard

Hi, I am trying to modify a script to convert a file size in bytes to Mb. I have tried using let for this, but this doesn't seem to work for large numbers, eg:- x=34358697984 let y=$x/1048576 echo $y 0 Is there another way of doing this? Regards Richard

Hi, I have a problem with an MS Word document that contains embedded Excel spreadsheet graphs. When I edit one of these graphs to include data for a new month and then save the document, the file size increases enormously. The file started out as 929Kb but is now approx. 50Mb! Has anybody else...

Hi, We are having problems imaging a server with Altiris software. The imaging appears to be hanging and cannot be killed off, we have tried rebooting but no joy. The console shows the following:- "Configuring computer - Restoring configuration please wait" The server is an HP Proliant BL20p...

Hi, I have been getting errors from one of my disks as follows:- Nov 4 09:32:10 stratus Error for Command: read Error Level: Recovered Nov 4 09:32:10 stratus scsi: [ID 107833 kern.notice] Requested Block: 68262 Error Block: 68262 Nov 4 09:32:10...

Thanks for the info. that explains why it is happening. The box has slots for two power supplies but only has one installed so it is obviously complaining about the 'missing' one. Is it possible to stop it doing this - i.e. is there a setting we can change somewhere? Regards Richard

Hi, We manage a number of servers at remote sites using PC Anywhere. We have one particular server that will not reboot without intervention - pressing F1 key is required. This can be a pain if no-one is available to do this on site. The box is a Compaq Proliant 3000 running Win2k. Any ideas...

Hi, I am trying to enable remote console access to a server running HP-UX 10.20 but am having problems. I am using a PC with modem and using Hyper Terminal to dial the modem on the server. I get message "Remote console connected" but cannot get any further - i.e. whatever I type does not appear...

Hi, I remotely administer a couple of E450s running Solaris 8. I would like to enable remote console access by connecting the boxes to each other via their serial ports. Am I correct in thinking that I need a 'null modem' cable for this? Also, which ports do I connect? Thanks Richard

Hi, My problem is this, I support a SAP R/3 system which interfaces to Sendmail to send out purchase orders to third party suppliers. We had to rebuild the system from scratch following a failed NT-W2K upgrade, and now the purchase orders are reaching the suppliers in corrupted form, ie text not...

Hi, I am having problems installing IIS on a WIN2K Server built with SP4. I am installing from mapped CD drive containing the WIN2K + SP4 disc. I go to add/remove, select IIS then point to the mapped drive. However, it keeps asking for the SP4 disk - we tried loading another CD with the SP4 exe...