Recent content by repairer

We have a Dell 1850 server running Windows 2003 Enterprise, this acts as our web server. We have recently installed 12GB RAM in this server, upgrading it from 4GB RAM, the application we run on it uses SQL 2005 Enterprise. when we installed the RAM the server only initally saw 4GB RAM, we had...

Hi, Wonder if anyone can help me with the following problem? I am trying to learn how to setup a Cisco 501. I am trying to do this at home on my own Internet connection. This is through a BT Home Hub. I have my normal desk top PC connected to this through which I access the internet, I also...

Hi, We have a HP DL360 1u Rack Server with Windows 2003 installed, the server has two 73gb SCSI drives, how do I tell if these drives are configured for RAID? I can only see one drive, in control panel system it lists under device manager/SCSI RAID controllers "SMART ARRAY 5i" Is my server...

Thanks guys for your help, managed to get it working, what I did was the orginal script had - $to = "$eusr\\\@$edom"; I took out two of the \ and got it to work, not sure why but it does. Thanks for your help. Pete

Keith, I'm not too sure what part of the script you would want ot see, what I did was enter the following at the begining of the script - $mailprog = '/usr/sbin/sendmail -i -t'; # for send mail and then I included these lines under the "sub SendMail" my ($from, $to, $subject, $content) = @_...

Could anyone help me with following problem, I downloaded a message board script from http://www.xmission.com/~sna/ I have got the scrip working and can post mesages, what I cannot get it to do is mail a new user back with his activation code. I have no knowledge whatsoever of pearl, but from...

I have a Windows 2000 server as my web server located with an Internet provider. My question is, if I want to re-boot my server how can I do it remotely? I have read about shutdown.exe and tried it on a local PC using the shutdown.exe -r command, but the PC just re-boots back to the logon and it...

Robert, Yes both drives are identical, it did say it was mirroring drives and both drives appear same colour as if it worked, just cannot understand why free disk space should be different.

Robert, Thanks for this, followed it through and it seemed to have worked OK, only problem I see is that after mirror of drives both drives don't have same disk space used, for example my C: drive shows free space of 29gig and my mirrored drive shows free space of 33.8gig is this normal? (also...

I am new to Windows 2000 server, I am setting up a web ser on a Dell 2450, I want to make sure that data is backed up to another drive on the server. The server has 3 x 39gig hard drives all same make, the operating system is installed on one of these drives. I want to install it so that in the...

Guys, Thanks for all your help, went back thru install and did a custom install, for some reason it now connects to the server. Thanks Pete

The customer is trying to connect to a Netware 4 server, but not sure what you mean regarding IPX being the default protocol? how would I check it? Looking at properties of the local area connection it as NWlink IPX, is that the required protocol? Thanks Pete

Wonder if anyone can help me, I am trying to talk a customer on the phone (he's a fair distance away from me so its not possible to visit) through installing Novell client on Windows XP prof. I'm having no luck getting it to connect to the server, we know the network connection is OK as we tried...

Thanks guys, solved the problem, it was a faulty Network card, changed card, now getting very fast connection. Pete

Wonder if anyone can help me with the following problem, I have broadband installed (512k) and just recently my connection to the web speeds have been very poor, I have a cable modem and also have a Zonet router connected, when I access the web from my PC download speeds are in the region of...