Arr,
Yes i see that, and have read that but i think we are having a misunderstanding, I dont care if it rings several telephones,
I have it set so only DN 24 Rings and then after x rings it pages the chimes.
This part works now, but there is erratic behaviouor on why it is calling the DN on...
Well, i havent seen that in the instructions i got here so i havent tried that.
However, power went off here today and of course came back on,
about 1 hour after power restored the doorphone started calling the DN about 5 times in 10 minutes.
This of course with no one touching the doorphone.
I...
just to be clear on that Arr, if i have a 3x8 KSU
i currently have 7 phones and 1 doorphone, are you saying to make the doorphone work in need to go to 6 phones 1 doorphone and 1 blank DN?
What i do find strange though as i have mentioned is that last night and ALL night about every 2 hours i...
well well,
as i sit here at my PC my doorphone has decided to call the DN it is assigned to and then run the page tones, looked at the front door and guess what, no one was there.
I pressed the button and nothing happened.
Well now i know the doorphone works, but any ideas as to why it would...
ok
let me try to explain
Justatec explaination seemed broken up, no continuity.
but here is my doorphone programming
F900
DN 27
Volume High
Call DN 24
Rings 5
Page Zone 3
Chime Type 4
Opener type none
Now DN 24 is set to be on page zone 3 and setup as per instructions in the doorphone manual...
your input seems somewhat scattered, i believe i have followed what you have suggested, however no change, i can intercom to the doorphone by dialing DN 27 but if i hit the button on the doorphone nothing happens on the phones, so any more insight would be great.
thanks
Well finally got the correct doorphone for my 3x8 KSU hoooked it up and guess what, only partially works.
I believe i have followed the instructions but still having problems with the doorphone ringing the lines.
My DP is DN 27, i have it set to ring 5 times, and page zone 3, prime line is I/C...
Just bought a Nortel Venture Doorphone thinking it was a doorphone for Nortel, however i cannot seem to get it to work with my system which is a 3x8 KSU 5.1, is this doorphone restricted to the Venture system or is there a way i can make this work?
thanks
My question is this, if you can attach up to 4 doorphones to your system, why is it only 4, if you have a 3x8 KSU shouldnt you be able to use up to 8 ? So given that, and reading the manual for a doorphone, it says to plug it in to one of the DN's of the KSU. Well if you have all 8 lines...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.