Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by RCA22

  1. RCA22

    CLID on ACDN

    Hi, I created an ACDN so I can forward a DID. It works however, the CLID is showing the pilot number and not the DID. Is there something I need to change in setting up the ACDN so it sends the DID? Thanks.
  2. RCA22

    Digits being stripped

    I found the problem - there are multiple NXX's on the switch and the CLID's for them were a mish mash. I cleaned it up and all is working just fine. Thanks much.
  3. RCA22

    Digits being stripped

    I checked a few things and here's what I found. Some phones have a different NXX and when I call from them, I don't get the full 10 digits on the set that is called, just the NPA. I suppose this is a different issue so, please let me know what I can check/fix. Thanks.
  4. RCA22

    Digits being stripped

    Hi there again... I thought I had it fixed when I added the CLID however, it did not. What else can I check? Thanks.
  5. RCA22

    How to create a virtual analog loop

    Yes - it is an Option 11 and what I would like to do is to create a phantom card to forward numbers. I will give it a try.
  6. RCA22

    Digits being stripped

    Right again GHTROUT! Thank you. With ACD's there is less control of what you can do so I used a virtual analog tn and use the calling line ID entry. Works well.
  7. RCA22

    How to create a virtual analog loop

    Hi, Can someone please let me know how to create a new virtual analog loop? Thanks.
  8. RCA22

    Digits being stripped

    Hi, I have some CBCT (call by call type) trunks to the PSTN on an Option 11C. I've programmed some numbers on the PBX as ACD with NCFW to a DID. When the 4 digits are called internally, the calls get to the destination however only the area code is presented. Any idea whats blocking the...
  9. RCA22

    Application DN

    Thank you. I will try and log into that.
  10. RCA22

    Application DN

    Hello - I have this BCM50 that has an application DN designated as Call Pilot DN. Some telephones sets have this DN for Forward No Answer. When there is no answer on one of these phones, a message plays but I don't know where that message is as there is no mailbox for it in CP or in the greeting...
  11. RCA22

    System Name Change

    Awesome! Thank you.
  12. RCA22

    System Name Change

    Hello. I have a BCM50 with a bunch of IP telephones and the company name is on the phone display. How and where can I change the name on the system? Thanks.
  13. RCA22

    CS1K Passwords

    I got it.... At the INIT prompt, type "yes" then you get ACCOUNT_REQ Thanks for your help.
  14. RCA22

    CS1K Passwords

    I don't get the ACCOUNT_REQ prompt. Which release do you get this in? My switches are 4.5 and below.
  15. RCA22

    CS1K Passwords

    Hi, How do you delete the credentials for a system administrator since the only command you can use with this gate opener is "CHG"? I'd rather delete old creds and create new ones. Thanks.
See more

Part and Inventory Search

Back
Top