Recent content by rbr123

Thanks to all who replied on this concern. We have resolved the issue. We met the maximum character that should be defined under Option 176 field. We just removed some of the CLAN IP add defined in this field and eft 2 addresses.

Dunstan, Does AVAYA IP boot test support multiple VLANs?

We actually have around 1,900 running IP phones and this is the only time we experienced this kind of issue.

JayNEC, I get errors if I add more CLANs (more than one). This is really weird as this was running before and we already checked the network as well as the DHCP server and all are running fine. I'll try to remove the other TFTP server IP address as suggested. If this thing doesn't work, do...

Data VLAN 72: L2Q=1,L2QVLAN=206 Voice VLAN 206: MCIPADD=10.0.203.203,10.16.0.51,10.16.0.50,10.16.3.10,10.16.3.11,MCPORT=1719,TFTPSRVR=10.3.35.22,10.3.35.20,10.3.35.21,L2QVLAN=206

Dunstan, Here's the setting of the current settings on option 176 Data VLAN 72: L2Q=1,L2QVLAN=206 Voice VLAN 206: MCIPADD=10.0.203.203,MCPORT=1719,TFTPSRVR=10.3.35.22,10.3.35.20,10.3.35.21,L2QVLAN=206 Appreciate all your help!

Thank you everyone! But still, my problem is the DHCP is not allowing me to add more CLANs. It somehow limiting me to one CLAN and if I add one more, the phone will get a bad address error.

Hi Everyone! I have 4610SW IP phones (mix versions of 2 and 2.2) previously working then suddenly gets bad IP address error. I validated the DHCP scope (option 176) then finally make it work after removing 4 CLAN IP addresses from the scope(I have 5 CLANs). Eventhough I have 1 CLAN board...

Include item "L2Q=1" in your data VLAN option 176 parameter