Recent content by randybreck

I reinstalled ISA and The PS2 is still not able to access the Internet. I was able to give it a static reserved IP Address through the DHCP server and successfully added an entry with that IP address to WINS and the Forward lookup zone in DNS. For testing I also opened up all content, ip...

Nhidalgo, I think you have a good point. I did set it up for a static ip address inthe DHCP but I noticed that the DHCP server always said this reservation was inactive. I ended up deinstalling ISA and reinstalling 2K server. I then realized that in addition to the reserved IP in DHCP I had...

Is it possible to allow traffic from a generic non-windows based box like the Playstation 2 to be routed to the internet through the ISA server? I am able to give the PS2 a static IP from the DHCP based upon the PS2s MAC Address. I configured protocols definitions for the ports that it uses...

I think it depends on the specific peice of equipment. I have noticed that some equipment may need an attenuator on the coax to prevent overdriving the input.

The user already has an account that restricts usage from 7:00 AM to 10:00 PM. The problem I am having is getting the Playstation 2 with an internet adapter to log onto the server with my son's login and password instead of using the server as a router. The DHCP server assigns it an IP address...

I'm new at this so I am not sure what FQDN means, but I was able to give it's MAC address a permanent IP address through the DHCP server and name it PLAYSTATION. I then went to DNS and named that IP address the same. It now appears as a built in computer under server users and computers. It...

Has anyone tried to connect the playstation2 with its network adapter to a Widows 2000 server? I installed Windows 2000 server in my home network so I could keep my 15 yr old off the internet at night. He recently purchased a network adapter for his playstation 2 and I would like to add it to...

Thanks that was what I hadn't done.

I found out that I may have to install some firewall client software. Where can I find this software? I assume it came with ISA server, but where and how? Thanks

I am new to ISA server and am having problems. I have a simple network with a cable modem to a linksys router to a win2k server to a switch and to the users. I had everything working fine with the active directory server until I instlled ISA server. I configured it for testing to allow all...

I finally found the info. RJ45 1 RX(ring) 2 RX(tip) 4 TX(ring) 5 TX(tip) 7 Frame ground DB15 1 TX(tip) 9 TX(ring) 3 RX(tip) 11 RX(ring) 2 Frame ground

I need to know the pinout for a T1 on an rj45 and also on a DB15. I know the pins for the rj45 are 1,2 and 4,5 but which ones are the tips and which ones are the rings? Basically I need to know which pins are TX(tip) TX(ring) and RX(tip) and RX(ring). I have some documentation, but I was told...

Take a look at the question I posed a couple of weeks ago. It may help. thread779-482138

Great info. Looks like I have my work cut out for me. Thanks.

I am new at network administration and would like to know more about writing scripts. Does anyone know and good tutorials that might help me. I am not even sure what type of language the scripts need to be written in: DOS, VB, etc. Any help will be appreciated.