Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by rafiki47

  1. rafiki47

    US timezone changes 2007

    If this in not a production Server then you could try to set the Date to March 12th. Then the time should be an hour ahead.
  2. rafiki47

    New Ultra 25 install

    Yes, I just had the same thing happen on my Ultra 45. Sun ended up replacing the Hard Drive. But the replacement had nothing on it.So I had to install Solaris from scratch. But on the good side they do not want the hard drive back, so now i have 2 250 GB hard drives in my workstation. Wow...
  3. rafiki47

    Network Troubleshooting

    OK guys, Call me crazy but I can access the SAN now. So why does it work? I didnt change anything. But you are saying if i reboot it will stop working again?
  4. rafiki47

    Network Troubleshooting

    Franz, Ok i am trying to connect a Sunfire V210, and a StorageTek 6100 SAN. I think it is a SAN , but i have been wrong before. Anyway I am away from the office today, but i can run the suggestions tomorrow. I will get you guys feedback as soon as I can. And Thanks for spending the time to help!
  5. rafiki47

    Network Troubleshooting

    CA, The loopback failed on all four ports, and there isn't a hostname.bge1 file. Thanks
  6. rafiki47

    Network Troubleshooting

    CA, Heres the info you requested. # more path_to_inst # # Caution! This file contains critical kernel state # "/pseudo" 0 "pseudo" "/scsi_vhci" 0 "scsi_vhci" "/options" 0 "options" "/pci@1f,700000" 0 "pcisch" "/pci@1f,700000/network@2" 0 "bge" "/pci@1f,700000/network@2,1" 1 "bge"...
  7. rafiki47

    Network Troubleshooting

    Well not much Luck. I have a SAN connected to a private network switch.It has an IP address of 192.168.128.101. So on My Server i set bge1 - to 192.168.128.100 Both have the same subnet mask of 255.255.255.0 When i try to ping the address i get no reply. Any ideas?
  8. rafiki47

    Network Troubleshooting

    CA, Thanks for the help. I ran watch-net-all and i got loopback failed errors. But after rebooting the server the lights on the 4port onbard NIC came back on. When i do an ifconfig -a i only see one connection, so i will try and plumb that one and get back to you with the results. Thanks,
  9. rafiki47

    Network Troubleshooting

    Hello, I have a Sunfire V210 with a 4 port network card. It was setup to the Public Network, and an Private. The Private no longer works. I get no lights in the back on the NIC. Could any one pass on some trouble shooting tips? Thanks,
  10. rafiki47

    Solaris 10 / RAC / SAN Config

    We found an answer. Instead of mounting trying to mount the SAN partition, we created symbolic links as follows: ln -s /dev/rdsk/c4t6xxxxs3 /dev/rdsk/ora_ocr_raw_4g => for the OCR file ln -s /dev/rdsk/c4t6xxxxs5 /dev/rdsk/ora_vote_raw_4g => for the voting disk During install, the paths for OCR...
  11. rafiki47

    Solaris 10 / RAC / SAN Config

    I'm trying to install an Oracle 10g RAC using 2 Sun V440s (Solaris 10) and a Sun Storagetek 6140 SAN for the clusterware files and database storage. Everything looks ready except for the SAN disks. I created 3 volumes - 1 for nonASM storage and two others for the Database files and FRA...
  12. rafiki47

    SERVER WON'T BOOT Solaris 10

    This was preconfigured from SUN
  13. rafiki47

    SERVER WON'T BOOT Solaris 10

    We found a workaround for the zone issue. Now it boots (or doesn't) with the following messages: Rebooting with command: boot Boot device: /pci at 1f,4000/scsi at 3/disk at 9,0:a File and args: SunOS Release 5.10 Version Generic 64-bit Copyright 1983-2005 Sun Microsystems, Inc. All rights...
  14. rafiki47

    SERVER WON'T BOOT Solaris 10

    Hello, I rebooted my V440 today and now it will only boot into maitenance mode. I get a bunch of errors bit this is the first one. executing start method /lib/svc/method/devices-local timeout override by svc.startd Id.so.1: /sbin/zonecfg_is_scratch: referenced symbol not found. Does any one...
  15. rafiki47

    Hardware - For Dummy

    Hello everyone, I recently purchased a preconfigured Sunfire V440 with Solaris 10. I also bought an HBA and installed it.When I opened the card it had no driver disk. So when I went online to look for them it said that they are included in Solaris 10. So the card is installed, but how do I get...
See more

Part and Inventory Search

Back
Top