Recent content by Raedeke

Thanks for the information. Once I have exchange and data moved over to new server, I will be more aggressive and try your suggestions. Right now I'm just trying to get the data off as quickly as I can. The server is a good box and I hope to be able to rebuild it and keep it as a spare -...

New Information. Over the weekend additional drives have "gone bad". The drive at ID 0 on our mirrored set all of a sudden shows it's defuct. At one point so did ID 1 - which meant we booted from the Raid boot disk - but was able to put it back on line. Also, another drive in the RAID5 showed up...

Any idea where I find where it might tell me if the array has been compacted yet? Unfortunatly, when the drive when down, it seemed that there may have been another bad drive in the array. I came back up and we had access to info all day yesterday. Today it looks like active directory is...

I appreciate the information on how it's supposed to happen. My problem is I don't trust that it's actually working. When it goes into rebuilding mode - I get no progress bar. Although the new drive is flashing amber, there is no activity on the other drives. Is there some prep work I need to...

OK - so maybe I need to ask a question. Is there any special instructions at to how to rebuild a array that is configured in RAID 5EE? At this point the thing could say it's rebuilding for the next year and I can't believe it would have done anything. It's been working for over 24 hours now...

Interesting you ask about the RAID5 - In the properties of the logical drive it does show it as a RAID5EE in an EXPANDED state. It also says that it is not protected by hot spare and the write cache mode is Enabled(write-back) Not sure I know what RAID5EE is... Regarding the lights - The...

We have a 3-4 Year old xSeries 226 server. Recently we had a drive go down and show defunct in the Raid Manager. We bought a replacement drive from third party (not IBM - they wanted $600 and looked to take 6 weeks to acquire) The drive is identical - 73.5G U320, etc. (same model number) We...

That works - but when I go to that phone and enter "feature * 0" and press one of the lines, it still comes up with 3902. The phone is a M7208 and won't allow me to administer the system from there. It wouldn't be such a big deal, but when someone leaves a message for 3967 - you can't easily...

Great - that works for calls coming in from outside... Now when I dial the 4 digit suffix 3967 I still get that it's not in service - is there a way to get the internal dialing working to that phone as well? Thanks

Thanks for the assistance. I'm not sure I was really clear on what I need to do. The phone number on the set currently is 3902 (a non-DID number) I'd like to change the number to 3967 (DID). If both sets were currently on the system, I would have no problem by simply setting the set...

Thanks - I'll try over their. Thanks very much. Cheers.

I have a Norstar Meridian system. I have about 50 DID numbers available to me, and need to change the number on one of my phone sets from it's current non-DID number to one of my avialable DID numbers. I can assign a line to the number and name the line and the set, but am having trouble...

I have a Norstar Meridian system. I have about 50 DID numbers available to me, and need to change the number on one of my phone sets from it's current non-DID number to one of my avialable DID numbers. I can assign a line to the number and name the line and the set, but am having trouble...