Recent content by Radoje

Hi Whosrdaddy, Thanks a lot ! Best regards, Radoje

Hi, CADAP says that software version is LZY 2030801/3/R1A Is it BC8.0 or BC8.1 ? Best regards, Radoje

Hi Lalrl, in April 2006 /// announced that they will introduce wireless LAN IP phones. 1.step - Spectra Link access points and phones will be implemented 2.step - /// will develop it's own system

Maxl, it cannot be done. you can only put a new LIM on a remote location.

wfk, Only the "cold start" of exchange will bring you back default password 33333. Unfortunatelly all the exchange data is erased in that case.

No way, V5.1 and V5.2 are not supported. The only interface that is supported is CAS, take a look at "CAS extension EL7" in Alex documentation. I played with EL7 in combination with UMUX1500 multiplexer(Ascom - Keymile) and it works OK.

you should first do some function tests: FTTDI:LIM=2; for tone receivers and senders FTMDI:LIM=2; for multiparty circuits

md110user -Put MFU board in same LIM where TLU76/3 is. -Don't forget to include A5 signal in signalling protocol.(D6 in VARO). A5 signal is caller ID request, if you are using CCITT R2 MFC signalling. -Do not use simplified MFC signalling (D7 in VARI). regards Radoje

Hi Pete I worked in an OMNI factory for about 5 years. Then instead of CEM&PEM, I started working with LIM&GSM :) Regards Radoje

OmniS3Tech..... Are you experienced with OMNI S3 from GTE/ATEA? I spent many hours working with it.... regards Radoje

...and my colleague says that ASPAC is well-known abbreviation for Asia-Pacific.

Altavista found following links: NADAP - Navy Alcohol and Drug Abuse Prevention Program Asian Language Legal Intake Program (ALLIP) Californians Against Discrimination and Preferences (CADAP). www.cadap.org Colorado Advisory Committee on Arson Prevention (CACAP) :)

In my opinion, the only way to stop data traffic is to know which telephone numbers belong to internet providers and make restriction on dialing of this numbers. Maybe, if you are using ISDN towards Telecom, you could play with bearer parameter of the route (BCAP), or with bearer conversion...

You can contact torres@diavox.com if you want to buy HSM (Hospitality Server Module)directly from Diavox.

Hi Extension Manager ! You should put GJUL4 boards in same position in both LIMs. Once I did not take care about this rule and I could not do the backup on HDU. Backup always stopped at one of the program units. Try it yourself...