Recent content by quell

Found the proplem with the second part of my post and thought I would share. Problem:>When the firewall reboots it says "Cannot select private keyType help or '?' for a list of available commands" Solution: Hi, Do the following ca zeroize rsa key ca gen rsa key 1024 ca save all Thanks...

http://securityresponse.symantec.com/avcenter/venc/data/w32.beagle@mm.removal.tool.html

first off get rid of your old ip: no ip address inside 192.168.0.254(<--ur ip) 255.255.255.0 then: ip address inside 192.168.0.254(<--new ip) 255.255.255.0 as far dependancies, is this inside interface being used for a gateway? If so you will have to change the gateway ip for whatever pc is...

Hello, I was wondering if someone could help me. I have a pix 515 and using the Cisco dialer 4.0.3 on a PC with XP SP2. I am able to connect with the dialer but when I try to use remote desktop or citrix I cannot access anything on the LAN. I recently upgraded from 6.2.2 to 6.3.3 and not for...

Check to make sure the file is in the right tftp folder.

Nevermind....upgraded the dialer to 4.0.3 and everything is back to normal.

Forgot to add that during the upgrade I used the old key. Dunno if that matters or not.

heheh must have posted at the same time :)

http://www.cisco.com/warp/public/110/34.shtml Hope this helps I would rather have it and not need it, then need it and not have it.

I recently upgraded our 515 from 622 to 633. Now no one can connect to the vpn useing VPN Dialer 3.5.2 (I think) with XP SP2 installed. Here is the debug isakmp log. At the end it says "error, msg not encrypted" I'm not for sure what causes this. Any help in the right direction would help...

hmmm...Guess I better read up some more on how to prevent relaying. http://members.iinet.net.au/~remmie/relay/ The last test 250 Queued mail for delivery. To: "spammer@spam.test" From: spamtest@[66.2xx.1xx.2xx] <<< 250 2.0.0 Resetting >>>> MAIL FROM: <<< 250 2.1.0...

Yes there is a place in exchange that you can enter IP's to block. You can do this if you see a lot of spam coming from one IP. 1. Open Ex sys manager 2. Right click on default SMTP select properties 3. Under the access tab select connection 4. Select "All except the list below" 5. Click on...

I was going through our email logs and found this entry a few times. I was curious if someone would care to explain this to me. Is this a relay attempt or a succesful relay? Neither the sender or the rcpt to: are from our domain. Any info would be helpfull. Thanks. 67.28.113.10 -...

This might help: How to change a Norton AntiVirus Corporate Edition client from unmanaged to managed...

Do a search on google for "ccapp.exe cpu usage". Seems to be a common problem. Some peeps say its a worm some say a problem with norton. Roll back to 8 if that didnt cause any problems.