Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by PWCircuits

  1. PWCircuits

    Canon MF8830Cdn "Turn main power ON. E015-0001" error message

    Hi, Thanks for reading. Our Canon MF8330Cdn printer (serial number EXK09207) when switched on, after a seconds warming up, appears with the error message "Turn main power ON. E015-0001". I can access the main menu (little star inside a head button) but clicking any other button just results...
  2. PWCircuits

    Hipath 3550 On Hold Music

    Thanks Don, The AK6 media player is the issue, we where able to read the CD card fine and after cleaning out the AK6 player the hold music was fine, for about an hour before it went back to the same issue, so we think it might just be old and overheating ! We've ordered an equivalent player off...
  3. PWCircuits

    Hipath 3550 On Hold Music

    Just a quick update to this. I've found a AK6 Digital Media Player/adapter with an SD card sticking out the top plugged into our telephone system - but not directly into the Hipath box. So i'm still not sure how it works but it looks like this is where the problem might be occurring from !...
  4. PWCircuits

    Hipath 3550 On Hold Music

    Hello all, thanks for reading, We have a Seimans Hipath 3550 V6.0 telephone system and our On Hold Music has screwed up. The system was installed professionally quite a few years ago now and I've inherited it ! For a long while the On Hold Music wasn't there (I'm pretty sure it was set up...
  5. PWCircuits

    All the buttons going to one number ?

    it's in reception, where visitors come in, so I was just thinking if they do need to phone someone it's only reception. It's the most basic model of phone so the minimum number of buttons. Might try and sent up a hunt group and see if you can have that listed multiple times. But thanks for...
  6. PWCircuits

    All the buttons going to one number ?

    On our hipath 3000 system we have a opti point 500 entry phone in reception and I'd like to program it so all the buttons ring the same number - now if I use manager c and set the first button to repdial switchboard & then try to set the second button to do the same it makes the first button set...
  7. PWCircuits

    Hipath 3000 DECTphones

    We've been told that we can only use Siemens models: S2 S3 SL3 We're currently are using a Siemens SL3 & Siemens S2 DECT phones on our system. Just so you know it's an older hipath 3000 as we are using the Manager C software. ( which also asks the question how hard is it to upgrade it ...
  8. PWCircuits

    Hipath 3000 DECTphones

    Hello all, We own a Siemans Hipath 3000 phone system with both corded and cordless phones and we are trying to work out if we can add any DECT phone or have to use the ones we already own / suggested by our phone provider ? Thanks for reading. [thumbsup2] Nigel
See more

Part and Inventory Search

Back
Top