Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations wOOdy-Soft on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by putney

  1. putney

    Controlling Telnet Access to ARN Router via RADIUS

    I've been doing RADIUS authentication witn ARN/ASN routers for quite a while. All you have to do is enable it in the router, just don't enable the user manager lock until your sure it's working. Have Radius return "Vendor Specifc attribute number 26" with a value of "2" give write access to the...
  2. putney

    Baystack 450 VLANS connected with x-over cable

    I have two VLANS on a 450 that I need to connect with a cross-over cable. each of the vlans are for the same subnet, but they are being fed from different domains of a firewall attached to a trunk port. It appears that the MAC addresses for both ports are the same so there appears to be a...
  3. putney

    Contivity - How do I set groups using RADIUS

    After digging deeper, I found the solution. I had to set the calss attribute to "ou=SAP" in RADIUS, the user was then assigned to the group /Base/SAP.
  4. putney

    Contivity - How do I set groups using RADIUS

    I didn't do any thing to mark it as inherited for /Base. When I created it, I added the Group name and had the parent as Base. I think this is what you are refering to, but if there is something else I need to do, I didn't do it.
  5. putney

    Contivity - How do I set groups using RADIUS

    I have two groups, /Base and /Base/SAP. I set up a user in RADIUS to return the "Class" attribute of "/Base/SAP" which is displayed in the event log. When the user logs onto the contivity using PPTP, the class is returned from RADIUS as "/Base/SAP", however the user...
See more

Part and Inventory Search

Back
Top