Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by PuterBD

  1. PuterBD

    EU24 Question

    Okay, thank you guys. I appreciate it =)
  2. PuterBD

    EU24 Question

    I have a customer with an IP500. They currently have 4 EU 24s and are possibly looking to add another but I am finding some confusing information as to how many the IPO can actually support. One document says 2 per DS module (which they have 2 of) and another document says a maximum of 8 is...
  3. PuterBD

    Call log shows almost all numbers "Unavailable"

    Yeah, the call log on the phone. It's a 4625 running 8.016 with a PRI.
  4. PuterBD

    Call log shows almost all numbers "Unavailable"

    Here's an odd problem I have not ran into before: Customer is running on an IPO 406 with 4.2.14 on it. I just received a call in which a guy is saying that almost all of the numbers in his call log are showing up as "Unavailable." This happens with both internal and external calls. Anyone...
  5. PuterBD

    Moving IPO

    Thank you for the quick responses! They are keeping the same IP address range, so I don't think that will be a problem and I believe they are moving their lines as well. I will double check with them of course. I just wanted to make sure I wasn't overlooking anything. Thank you again for...
  6. PuterBD

    Moving IPO

    Hi Guys/Gals, I've got a customer who is moving their IPO from one location to another. My boss is fairly insistent that there is a bunch of programming changes that need to be done in order for the system to move, but I don't think there is that much to it. My boss doesn't really know the...
  7. PuterBD

    Users hear themselves?

    AGC was turned on. They turned it off and said it helped somewhat, but the problem still exists. That's a good start though, so thanks. Have any other suggestions possibly?
  8. PuterBD

    Users hear themselves?

    Yes, they have VLANs setup for voice/data. Turning off Direct Media Path doesn't seem to have helped sadly. They have an office and a construction trailer outside of the office and are now reporting that if someone is on the phone in the office and someone is on the phone in the trailer that...
  9. PuterBD

    Users hear themselves?

    LOL! "Allow Direct Media Path" is checked, yes.
  10. PuterBD

    Users hear themselves?

    Hi Gang, I'm having a weird issue!! A few weeks ago we upgraded our customer's IP Offices to 4.2 (14). They have 9 different sites and only one of them has been complaining of this problem since then. This site in particular has about 10 users. They are all complaining that they can hear...
  11. PuterBD

    Night Service Issue

    I created a short code *99 that is set to "Feature: Auto Attendant". When *99 is dialed it just takes the user to their voicemail. Perhaps I am doing something wrong here. It's not only on one line, it's on all of them. All of the call routes for the numbers in question are set up the same...
  12. PuterBD

    Night Service Issue

    They're using VMPro and have a PRI along with a couple analog lines as well.
  13. PuterBD

    Night Service Issue

    Hi Gang, I've got an customer with an IPO 406 running 3.2 (17). They are claiming that suddenly their night auto-attendant is not picking up when someone calls in on one of their main lines. They said that the caller hears one ring and then there is just silence. I have double checked to...
  14. PuterBD

    Need a bit of help

    Great, thanks for the help guys! The only last small issue I'm having is that when I put the system into night mode it will go to the night group but when the AA picks up it just plays the day greeting still. I have made an AA for night mode in the VM Pro Client and named it "Night" and the...
  15. PuterBD

    Need a bit of help

    Yes, we are running VMPro with the latest versions of Manager and IPO. It's a demo unit for potential clients so we keep it up to date and have a bunch of different licenses for it.
See more

Part and Inventory Search

Back
Top