Recent content by ptiernan

Thanks Chamvari I dont have PC admin so need to do everything on the reception handset. Dont have a great knowledge of this so it would be good if someone could give me a workflow on how to do this. Much Thanks Paul

Hi All Don't progam this ipLDK 100 switch much and all prorgamming is done on the reception handset. Hopeing this will be fairly easy, looking to setup a new pickup group can anyone help with instructions on how to do this. Much Thanks Paul

Thanks for your help but I had to call out an engineer to have a look at this. The problem was with the CPU, fortunatly I had 2 chassis so just moved all the cards to the second chassis and done a little programing and all worked.

I also have tried using the reset button on the MPB, pressed this once with no effect still getting the NO SYNC message on the phones

I have tried a reboot (switched the power off then on again) of the telephone switch and still got the same message. Do I need to do anything else to reset the PBX.

Hi, Problem with my IP LDK 100 and the handsets with display's are displaying a NO SYNC message any ideas what is cuasing this. We also have a payphone that is ringing constantly?

Hi, I have an extension 5043 that has a direct dial number attached I want to forward all the calls coming to this direct dial number to external number. The extension has an LDP-7004N handset. I have tried the following on the handset 554 1 9(for and outside line) 0141XXXXXXX (the number I...

Hi doktor, Yes the reduction of active ISDN channels worked great thanks. (Well after 5 mins I worked out I had to put the zero before the 9) So what CO group would I need to send lines to to make active? Thanks very much for your help with this as you saved me alot of grief and cost to call...

Hi Doktor, Thanks for your help it worked like a dream. The system didnt have a password luckly enough.

Hi doktor, Thanks for your very quick response. I haven’t been given the password for this system but I was going to try 0000 as I think I seen somewhere that this is the default.

Hi All, Looking for help with a problem I have with a LDK-100, recently I reduced the number of ISDN channels from 12 down to 8 but after this was implemented the site was unable to make outbound calls but able to receive inbound calls. When trying to make an outbound call it tries to get out...

I have just recently joined a company that has just merged with another similar sized organization. Company 1 70 Users Head Office 6 Servers – Windows 2003, Exchange 2003, File Store 4 MB ADSL Company 2 50 Users 2nd Site 6 Servers – Windows 2003, Exchange 2003, File Store 4MB SDSL Prior to me...

I think I may have worded this question wrong. I have not published my exchange for OWA nor do I want to. I am having a problem with users on my network accessing other networks OWA. I have ISA 2004 and if I don’t force the users to be authenticated (using integrated authentication) they can...

Hi coco10 Thanks for the responce I have not published my Exchange it is the 3rd party company that has published there exchange. I don not have control over the config on the 3rd party company. I do not have a OWA listener is this what I need and if so how to I set this up in ISA 2004. Much...

Hi I am having a problem logging into one of my users OWA on a third party company server. I have a Windows 2003 domain and using ISA 2004 as a Web Proxy. I have got this problem down to a setting in ISA or IE. Until I changed my ISA server to force Authentication OWA to this server worked...