Recent content by psbucs

hi - tryng to figure out how to configure my 871w in order to use ip phones. any help would be appreciated.

I assume your vwic module is installed within the Cisco 3640 Router login to your 3640 router with administrator privledge Cisco>en <enter> Password:xxxxxxx <enter> at the admin prompt # show inventory Cisco#show inventory <enter> you should then see something similar to this NAME: "3640...

if both T1 lines are from the same vendor, look into getting a vwic module and installing it into one of the routers you have.

I'm having issues with the 871W - Users are unable to connect to the network using wireless. validating identity is all they get. we authenticate using a Radius Server at a remote location. no problem connecting to the network using the ethernet cable. below is what my configuration on the...

I am trying to use SolarWinds TFTP, upon trying to execute, I get a popup window " Cannot start TFTP Server, A TFTP Server is already running on Port 69" anyone have a fix for this ? I did a netstat and I don't show any type of TFTP Service running on any ports. appreciate any assistance in...

check out the below link .... http://www.directron.com/faq3switches.html

here goes rvnguy ... tried searching for a known file on the shared network drive with no joy. network os is w2k, client is xp sp2, ethernet connection, I have full permissions on the shared network drive .. just for the sake of it, I am able to search successfully for files on my local...

major problem here and I can't figure it out. hopefully someone has the solution. I am unable to search for files on mapped networked drives ? the following is all I get " Search is complete, there are no results to display " anyone have the solution ? Thanks in advance.

setup roaming port analysis on the 3300 switch. hope this helps ..

prior to stacking the switch with the other ensure you assign an appropriate ip address to the soon to be added switch within the same subnet .... connect the uplink port ( 25 ) of the first switch to the downlink port ( 25 ) of the second switch thats pretty much it .... hope this helps ...

thanks for the link chieftan999 ...

guess not ... Thanks

Can somebody please explain how I can change the current queueing strategy from fifo to weighted fair ? Virtual-Access1 is up, line protocol is up Hardware is Virtual Access interface MTU 1500 bytes, BW 56 Kbit, DLY 100000 usec, reliability 255/255, txload 13/255, rxload 209/255...

I have RIP setup on my CISCO831 Router. here is my setup router rip version 2 network 10.0.0.0 neighbor 10.10.10.52 no auto-summary As you can see I get nothing upon entering the following command when I telnet into the router ... nbrtest# nbrtest#debug ip rip RIP protocol debugging is on...

I am in the beginning stages of testing a CISCO831 Router on A DSL Line I have in my office. I want to be able to us the DSL Line as a backup for my office network just in case the frame relay the office uses to connect to the WAN suffers an outage. The problem I am having is that I am unable to...