Recent content by PRITelcom

Hi thank you for the reply. Here i my config - bob Router#show version Cisco Internetwork Operating System Software IOS (tm) C2600 Software (C2600-IS3X-M), Version 12.3(26), RELEASE SOFTWARE (fc2) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2008 by cisco Systems...

HI I HAVE A CISCO 2612 ROUTER and I am unable to get my avaya IP phones to run. I have tried about 10 differnt firmware on the router. Command that i can't run are the ones with a * below class-map match-any SDM-Signaling-2 match dscp cs3 match dscp af31 match protocol h323 * match...

How the network is setup. I have 3 vlans Vlan 1 - is my management vlan Vlan 240 - is my data vlan (subnet 10.127.240.0/24) Vlan 241 - is my voice vlan (10.127.241.0/24) I have added 2 DHCP scopes on my windows 2003 server (ip of server 10.127.240.246) Data scope 1 (data) 10.127.240.0 Scope...

I Have now updated my intuity to 5.1 - msg waiting lights still will not light

How many users do you need to record or are you recording incomming trunks?

I have vm picking up now, (Thanks for your help) but message lights will not light. Any ideas?

I think it is version 4.7

Yes it is setup, but for some reasom VM will not pickup.

I have Intuity Audix v 4.7, Definity prologix Below is how i route calles to VM between 2 of my sites. ------------------------------------------ Let’s say I have a station at the remote building x2028 x2028 goes to coverage path 4 cover path 4 goes to a hunt group 99. Hunt group 99 goes...

Intuity Audix routing problem ------------------------------------------------------------ I have a prologix at a remote building with a T1 connected to a secondary building prologix. The secondary building has a t1 to the main building g3 pbx (This is the location where the VM is...