Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by plotkiller

  1. plotkiller

    Backup/Distributed Voicemail and Voicemail to Email

    I had the same issue on a windows 03 server running vmpro 7.0.23 using distributed voicemail. The log showed the following: 11/04/2012 00:30:37.437 - Attempting to connect to host example.org on port 25, local bound address is (null) 11/04/2012 00:30:37.437 - CSMTPConnection::Connect: Could not...
  2. plotkiller

    ICLID Pass Through Question

    SS Pass through the Calling Party Number. For example, to provide the incoming ICLID at the far end of a VoIP connection, a short code ? with telephone number .SS should be added to the IP line. i Both the S and SS characters can be followed by an i, that is Si and SSi. Doing this sets the...
  3. plotkiller

    406 V2 4.0 5420 "please wait"

    Make sure your working dir is set to the manager folder, "C:\program files\Avaya\IP Office\Manager". It's probably unable to find the files to update the phones through the TFTP server, or it may just be a TFTP issue. Check that your TFTP address is set correctly in the system tab.
  4. plotkiller

    upgrade to 4.0(10) now hard redial does not work

    Try putting your dial out code as a prefix for the lines
  5. plotkiller

    IPO 500 and Call Forward to external not working.

    Does the user that your forwarding have a physical phone or is it a phantom\hotdesk user? I had it happen to me on phantom\hotdesk users, but deleting and then re-adding the ext back resolved it for me so far.
  6. plotkiller

    Avaya One X10 Analog terminal adapter

    Are you just using the One X phones to try to dial out, or are you connecting it to an IP Office through an analog ext. port?
  7. plotkiller

    Call Forward with Caller ID

    Copy and paste the main ARS, rename it "Remote" In all of the short codes, or the short code of you choosing, put ".SS" at the end of the telephone number. So if you have a code of "1N;" set the telephone number to be "1N.SS" with a feature of dial 3k1. Build a seperate dial out code, in system...
  8. plotkiller

    Ip Office 4T 8A Upgradin to 4.0

    I stand corrected..... 2T+4A (3 VoIP)* 4T+8A (3 VoIP)* 4T+4A+8DS (3 VoIP) 4T+4A+8DS (16 VoIP) *These models are still supported but are no longer available from Avaya. Previous models that included integral DT ports are not supported on IP Office 3.0 or...
  9. plotkiller

    Ip Office 4T 8A Upgradin to 4.0

    As far as I knew, the 8a SOHO was not supported in 4.0
  10. plotkiller

    partner mail ?

    It will also transfer you if your vm hunt group members are not all in the hunt group. What VM do you have?
  11. plotkiller

    Voice mail Prop

    del 2??? from the main menu, have 2 go to a sub menu with ??? and timeout in one sec to go to the original 2 selector code destination.
  12. plotkiller

    Ring tone needed

    It sounds like you have an assisted transfer, use a direct transfer instead..... assuming that it works on your version!
  13. plotkiller

    Partner Messaging

    I need to get 2 messages from a r6 Partner Messaging and convert them into .wav files. Is there any way to accomplish this without using the unified messaging?
  14. plotkiller

    Embedded VM - HG plays system greeting only

    Was the greeting activated for outside calls & inside calls? Are you testing both?
  15. plotkiller

    Installing VCM to IP Office 3.2.57

    The only time I have had a 406 reboot from VCM is when I put an old 403 (5chan) one into a 406v2. I'm not sure if that helps or not.
See more

Part and Inventory Search

Back
Top